FINAL
Am27C040
4 Megabit (512 K x 8-Bit) CMOS EPROM
DISTINCTIVE CHARACTERISTICS
■ Fast access time
■ Single +5 V power supply
— Available in speed options as fast as 90 ns
■ Low power consumption
■ ±10% power supply tolerance standard
■ 100% Flashrite™ programming
— Typical programming time of 1 minute
— <10 µA typical CMOS standby current
■ Latch-up protected to 100 mA from –1 V to
■ JEDEC-approved pinout
VCC + 1 V
— Plug-in upgrade for 1 Mbit and 2 Mbit EPROMs
— Easy upgrade from 28-pin JEDEC EPROMs
■ High noise immunity
■ Compact 32-pin DIP, PDIP, PLCC packages
GENERAL DESCRIPTION
The Am27C040 is a 4 Mbit ultraviolet erasable pro-
grammable read-only memory. It is organized as 512K
bytes, operates from a single +5 V supply, has a static
standby mode, and features fast single address loca-
tion programming. The device is available in windowed
ceramic DIP packages and plastic one-time program-
mable (OTP) packages.
thus eliminating bus contention in a multiple bus micro-
processor system.
AMD’s CMOS process technology provides high
speed, low power, and high noise immunity. Typical
power consumption is only 100 mW in active mode,
and 50 µW in standby mode.
All signals are TTL levels, including programming sig-
nals. Bit locations may be programmed singly, in
blocks, or at random. The device supports AMD’s
Flashrite programming algorithm (100 µs pulses) re-
sulting in typical programming time of 1 minute.
Data can be typically accessed in less than 90 ns, al-
lowing high-performance microprocessors to operate
without any WAIT states. The device offers separate
Output Enable (OE#) and Chip Enable (CE#) controls,
BLOCK DIAGRAM
V
Data Outputs
DQ0–DQ7
CC
V
V
SS
PP
Output Enable
Chip Enable
and
OE#
Output
Buffers
Prog Logic
CE#/PGM#
Y
Y
Gating
Decoder
A0–A18
Address
Inputs
X
4,194,304-Bit
Cell Matrix
Decoder
14971G-1
Publication# 14971 Rev: G Amendment/0
Issue Date: May 1998