FINAL
Am27C020
2 Megabit (256 K x 8-Bit) CMOS EPROM
DISTINCTIVE CHARACTERISTICS
■ Fast access time
■ Single +5 V power supply
— Speed options as fast as 55 ns
■ Low power consumption
■ ±10% power supply tolerance standard
■ 100% Flashrite™ programming
— Typical programming time of 32 seconds
— 100 µA maximum CMOS standby current
■ JEDEC-approved pinout
■ Latch-up protected to 100 mA from –1 V to
VCC + 1 V
— Plug in upgrade of 1 Mbit EPROM
— Easy upgrade from 28-pin JEDEC EPROMs
■ High noise immunity
■ Compact 32-pin DIP, PDIP, and PLCC packages
GENERAL DESCRIPTION
The Am27C020 is a 2 Megabit, ultraviolet erasable pro-
grammable read-only memory. It is organized as 256
Kwords by 8 bits per word, operates from a single +5 V
supply, has a static standby mode, and features fast
single address location programming. Products are
available in windowed ceramic DIP packages, as well
as plastic one time programmable (OTP) PDIP and
PLCC packages.
thus eliminating bus contention in a multiple bus micro-
processor system.
AMD’s CMOS process technology provides high
speed, low power, and high noise immunity. Typical
power consumption is only 100 mW in active mode,
and 100 µW in standby mode.
All signals are TTL levels, including programming sig-
nals. Bit locations may be programmed singly, in
blocks, or at random. The device supports AMD’s
Flashrite programming algorithm (100 µs pulses), re-
sulting in a typical programming time of 32 seconds.
Data can be typically accessed in less than 55 ns, al-
lowing high-performance microprocessors to operate
without any WAIT states. The device offers separate
Output Enable (OE#) and Chip Enable (CE#) controls,
BLOCK DIAGRAM
V
Data Outputs
DQ0–DQ7
CC
V
V
SS
PP
Output Enable
Chip Enable
and
OE#
CE#
Output
Buffers
Prog Logic
PGM#
Y
Y
Gating
Decoder
A0–A17
Address
Inputs
2,097,152
Bit Cell
Matrix
X
Decoder
11507H-1
Publication# 11507 Rev: H Amendment/0
Issue Date: May 1998