PRELIMINARY
TM
Am186 ED/EDLV
High Performance, 80C186- and 80C188-Compatible,
16-Bit Embedded Microcontrollers
DISTINCTIVE CHARACTERISTICS
n E86TM family 80C186- and 80C188-compatible
– Serial port hardware handshaking with CTS,
microcontroller with enhanced bus interface
RTS, ENRX, and RTR selectable for each port
– Lower system cost with higher performance
– 3.3-V ± 0.3-V operation (Am186EDLV
microcontrollers)
– Improved serial port operation enhances 9-bit
DMA support
– Independent serial port baud rate generators
– DMA to and from the serial ports
n Programmable DRAM Controller
– Supports zero-wait-state operation with 50-ns
DRAM at 40 MHz, 60-ns @ 33 MHz, 70-ns @ 25
MHz
– Includes programmable CAS-before-RAS
refresh capability
– Watchdog timer can generate NMI or reset
– A pulse-width demodulation option
– A data strobe, true asynchronous bus interface
option included for DEN
– Reset configuration register
n Familiar 80C186 peripherals
– Two independent DMA channels
n High performance
– 20-, 25-, 33-, and 40-MHz operating frequencies
– Zero-wait-state operation at 40 MHz with 70-ns
static memory
– 1-Mbyte memory address space
– 64-Kbyte I/O space
– Programmable interrupt controller with up to 8 ex-
ternal and 8 internal interrupts
– Three programmable 16-bit timers
– Programmable memory and peripheral
chip-select logic
– Programmable wait state generator
– Power-save clock divider
n Enhanced features provide improved memory
access and remove the requirement for a 2x clock
input
– Nonmultiplexed address bus
– Processor operates at the clock input frequency
– 8-bit or 16-bit programmable bus sizing including
8-bit boot option
n Software-compatible with the 80C186 and
80C188 microcontrollers with widely available
native development tools, applications, and
system software
n Enhanced integrated peripherals
n A compatible evolution of the Am186EM,
– 32 programmable I/O (PIO) pins
Am186ES, and Am186ER microcontrollers
– Two full-featured asynchronous serial ports allow
full-duplex, 7-bit, 8-bit, or 9-bit data transfers
n Available in the following packages:
– 100-pin, thin quad flat pack (TQFP)
– 100-pin, plastic quad flat pack (PQFP)
GENERAL DESCRIPTION
The Am186TMED/EDLV microcontrollers are part of the
AMD E86TM family of embedded microcontrollers and mi-
croprocessors based on the x86 architecture. The
Am186ED/EDLV microcontrollers are the ideal upgrade
for 80C186/188 designs requiring 80C186/188 compat-
ibility, increased performance, serial communications, a
direct bus interface, and more than 64K of memory.
sizing, and programmable I/O (PIO) pins on one chip.
Compared to the 80C186/188 microcontrollers, the
Am186ED/EDLV microcontrollers enable designers to
reduce the size, power consumption, and cost of em-
bedded systems, while increasing reliability, functional-
ity, and performance.
The Am186ED/EDLV microcontrollers have been
designed to meet the most common requirements of
embedded products developed for the communications,
office automation, mass storage, and general
embedded markets. Specific applications include
PBXs, multiplexers, modems, disk drives, hand-held
and desktop terminals, fax machines, printers,
photocopiers, and industrial controls.
The Am186ED/EDLV microcontrollers integrate a com-
plete DRAM controller to take advantage of low DRAM
costs. This reduces memory subsystem costs while
maintaining SRAM performance.The Am186ED/EDLV
microcontrollers also integrate the functions of a CPU,
nonmultiplexed address bus, three timers, watchdog
timer, chip selects, interrupt controller, two DMA control-
lers, two asynchronous serial ports, programmable bus
This document contains information on a product under development at Advanced Micro Devices. The information
is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed
product without notice. AMD, the AMD logo, and combinations thereof are trademarks of Advanced Micro Devices,
Inc.
Publication# 21336 Rev: A Amendment/0
Issue Date: May 1997