5秒后页面跳转
ALD1701DA PDF预览

ALD1701DA

更新时间: 2024-10-28 22:47:47
品牌 Logo 应用领域
先进线性 - ALD 运算放大器
页数 文件大小 规格书
6页 49K
描述
MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER

ALD1701DA 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:Contact Manufacturer零件包装代码:DIP
包装说明:DIP, DIP8,.3针数:8
Reach Compliance Code:unknownECCN代码:EAR99
HTS代码:8542.33.00.01风险等级:5.91
放大器类型:OPERATIONAL AMPLIFIER架构:VOLTAGE-FEEDBACK
最大平均偏置电流 (IIB):0.01 µA25C 时的最大偏置电流 (IIB):0.00003 µA
标称共模抑制比:83 dB频率补偿:YES
最大输入失调电压:6500 µVJESD-30 代码:R-GDIP-T8
JESD-609代码:e0低-偏置:YES
低-失调:NO微功率:YES
标称负供电电压 (Vsup):-2.5 V功能数量:1
端子数量:8最高工作温度:125 °C
最低工作温度:-55 °C封装主体材料:CERAMIC, GLASS-SEALED
封装代码:DIP封装等效代码:DIP8,.3
封装形状:RECTANGULAR封装形式:IN-LINE
峰值回流温度(摄氏度):NOT SPECIFIED功率:NO
电源:+-2.5/5 V可编程功率:NO
认证状态:Not Qualified最小摆率:0.33 V/us
标称压摆率:0.7 V/us子类别:Operational Amplifiers
最大压摆率:0.25 mA供电电压上限:6 V
标称供电电压 (Vsup):2.5 V表面贴装:NO
技术:CMOS温度等级:MILITARY
端子面层:Tin/Lead (Sn/Pb)端子形式:THROUGH-HOLE
端子节距:2.54 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED标称均一增益带宽:700 kHz
最小电压增益:15000宽带:NO

ALD1701DA 数据手册

 浏览型号ALD1701DA的Datasheet PDF文件第2页浏览型号ALD1701DA的Datasheet PDF文件第3页浏览型号ALD1701DA的Datasheet PDF文件第4页浏览型号ALD1701DA的Datasheet PDF文件第5页浏览型号ALD1701DA的Datasheet PDF文件第6页 
A
L
D
DVANCED  
INEAR  
EVICES, INC.  
ALD1701A/ALD1701B  
ALD1701/ALD1701G  
MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER  
GENERAL DESCRIPTION  
FEATURES  
TheALD1701isamonolithicCMOSmicropowerhighslewrateoperational  
amplifier intended for a broad range of analog applications using ±1V to  
±6V dual power supply systems, as well as +2V to +12V battery operated  
systems. All device characteristics are specified for +5V single supply or  
±2.5V dual supply systems. Supply current is 250µA maximum at 5V  
supply voltage. It is manufactured with Advanced Linear Devices' en-  
hanced ACMOS silicon gate CMOS process.  
• All parameters specified for +5V single  
supply or ±2.5V dual supply systems  
• Rail to rail input and output voltage ranges  
• No frequency compensation required --  
unity gain stable  
• Extremely low input bias currents --  
1.0pA typical (30pA max.)  
• Ideal for high source impedance  
applications  
• Dual power supply ±1.0V to ±6.0V operation  
• Single power supply +2V to +12V operation  
• High voltage gain -- typically 100V/mV  
@ ±2.5V(100dB)  
The ALD1701 is designed to offer a trade-off of performance parameters  
providing a wide range of desired specifications. It offers the popular  
industry standard pin configuration of µA741 and ICL7611 types.  
The ALD1701 has been developed specifically for the +5V single supply or  
±1V to ±6V dual supply user. Several important characteristics of the  
device make application easier to implement at those voltages.  
• Drive as low as 10Kload  
• Output short circuit protected  
• Unity gain bandwidth of 0.7MHz  
• Slew rate of 0.7V/µs  
First, the operational amplifier can operate with rail to rail input and output  
voltages. This means the signal input voltage and output voltage can be  
equal to the positive and negative supply voltages. This feature allows  
numerous analog serial stages and flexibility in input signal bias levels.  
Secondly, the device was designed to accommodate mixed applications  
where digital and analog circuits may operate off the same power supply  
orbattery. Thirdly,theoutputstagecantypicallydriveupto50pFcapacitive  
and 10Kresistive loads.  
• Low power dissipation  
APPLICATIONS  
• Voltage amplifier  
• Voltage follower/buffer  
• Charge integrator  
• Photodiode amplifier  
These features, combined with extremely low input currents, high open  
loop voltage gain of 100V/mV, useful bandwidth of 700KHz, a slew rate of  
0.7V/µs, low power dissipation of 0.5mW, low offset voltage and tempera-  
ture drift, make the ALD1701 a versatile, micropower operational amplifier.  
• Data acquisition systems  
• High performance portable instruments  
• Signal conditioning circuits  
• Sensor and transducer amplifiers  
• Low leakage amplifiers  
• Active filters  
The ALD1701, designed and fabricated with silicon gate CMOS techno-  
logy, offers 1pA typical input bias current. On chip offset voltage trimming  
allows the device to be used without nulling in most applications.  
• Sample/Hold amplifier  
• Picoammeter  
• Current to voltage converter  
PIN CONFIGURATION  
ORDERING INFORMATION  
Operating Temperature Range  
8
7
6
5
N/C  
-IN  
1
2
3
4
N/C  
-55°C to +125°C  
0°C to +70°C  
0°C to +70°C  
+
V
8-Pin  
8-Pin  
8-Pin  
CERDIP  
Small Outline  
Plastic Dip  
+IN  
OUT  
N/C  
Package  
Package (SOIC)  
Package  
-
ALD1701A DA  
ALD1701B DA  
ALD1701 DA  
ALD1701G DA  
ALD1701A SA  
ALD1701B SA  
ALD1701 SA  
ALD1701G SA  
ALD1701A PA  
ALD1701B PA  
ALD1701 PA  
ALD1701G PA  
V
TOP VIEW  
DA, PA, SA PACKAGE  
* N/C Pin is internally connected. Do not connect externally.  
* Contact factory for industrial temperature range  
© 1998 Advanced Linear Devices, Inc. 415Tasman Drive, Sunnyvale, California 94089 -1706 Tel: (408) 747-1155 Fax: (408) 747-1286 http://www.aldinc.com  

ALD1701DA 替代型号

型号 品牌 替代类型 描述 数据表
ALD1701BDA ALD

功能相似

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER

与ALD1701DA相关器件

型号 品牌 获取价格 描述 数据表
ALD1701G ALD

获取价格

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
ALD1701GDA ALD

获取价格

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
ALD1701GPA ALD

获取价格

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
ALD1701GPAL ALD

获取价格

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
ALD1701GSA ALD

获取价格

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
ALD1701GSAL ALD

获取价格

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
ALD1701PA ALD

获取价格

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
ALD1701PAL ALD

获取价格

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
ALD1701SA ALD

获取价格

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
ALD1701SAL ALD

获取价格

MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER