AL9902
LINEAR AND PWM DIMMING HIGH VOLTAGE LED DRIVER
Description
Pin Assignments
The AL9902 high-voltage PWM LED driver provides an efficient
solution for offline high-brightness LED lamps from rectified line
voltages ranging from 85VAC up to 277VAC. The AL9902 has an
internal MOSFET that allows switching frequencies up to 300kHz,
with the switching frequency determined by an external single
resistor. The AL9902 topology creates a constant current through the
LEDs providing constant light output. The output current is
programmed by one external resistor.
SW NC
SO
GND
9
CS
8
VIN
77
12 11 10
12
EP1
EP2
5
11
NC
2
3
4
66
The LED brightness can be varied by both linear and PWM dimming
using the AL9902’s LD and PWM pins respectively. The PWM input
operates with duty ratio of 0-100% and frequency of up to several
kHz.
NC PWM VDD
LD Rosc
U-DFN6040-12
NC
SO
NC
NC GND CS
11 10
NC VIN
The AL9902 is available in the thermally enhanced U-DFN6040-12
and SO-16 packages.
16 15 14
13 12
9
Features
>90% Efficiency
Universal Rectified 85 to 277VAC Input Range
Internal MOSFET Up to 650V, 2A
1
NC
2
NC
3
5
PWM
6
7
4
8
High Switching Frequency Up to 300kHz
Internal Voltage Regulator Removes Start-Up Resistor
7.5V Regulated Output
SW NC
VDD LD Rosc
SO-16
Tighter Current Sense Tolerance Better Than ±5%
LED Brightness Control with Linear and PWM Dimming
Internal Over-Temperature Protection (OTP)
U-DFN6040-12 and SO-16 Packages
Applications
LED Offline Lamps
High Voltage DC-DC LED Driver
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Signage and Decorative LED Lighting
Back Lighting of Flat Panel Displays
General Purpose Constant Current Source
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Typical Applications Circuit
1
AC+
2
3
HD06
Z1
602V
C1
C3
AC-
4
D1
VIN
Rosc
SW
VDD
LD
AL9902
L1
SO
CS
PWM
Rosc
GND
C2
Rsense
1 of 18
www.diodes.com
July 2015
© Diodes Incorporated
AL9902
Document number: DS37878 Rev. 1 - 2