PD-97181C
AHP270XXS SERIES
270V Input, Single Output
HYBRID - HIGH RELIABILITY
DC/DC CONVERTER
Description
The AHP Series of DC/DC converters feature high power
density without derating over the full military temperature
range. This series is offered as lower cost alternatives to
the legendary AFL series with improved performance for
new design applications. The AHPs are form, fit and
functional replacement to the AFL series. The new AHP
series offers a full compliment of single and dual output
voltages operating from nominal +28V or +270V inputs
with output power ranging from 66W to 120W. For
applications requiring higher output power, multiple
converters can be operated in parallel. The internal current
sharing circuits assure equal current distribution among
the paralleled converters. Same as the AFL, the AHP
series incorporates International Rectifier’s proprietary
magnetic pulse feedback technology providing optimum
dynamic line and load regulation response. This feedback
system samples the output voltage at the pulse width
modulator fixed clock frequency, nominally 550KHz.
Multiple converters can be synchronized to a system clock
in the 500KHz to 700KHz range or to the synchronization
output of one converter. Undervoltage lockout, primary
and secondary referenced inhibit, soft-start and load fault
protection are provided on all models. Also included is
input over-voltage protection, a new protection feature
unique to the AHP.
AHP
Features
n 160V To 400V Input Range
n 3.3V, 5V, 6V, 9V, 12V, 15V, 25V and 28V Outputs
Available
n High Power Density - up to 84W/in
n Up To 120W Output Power
n Parallel Operation with Stress and Current Sharing
n Low Profile (0.380") Seam Welded Package
n Ceramic Feed thru Copper Core Pins
n High Efficiency - to 87%
n Full Military Temperature Range
n Continuous Short Circuit and Overload Protection
n Remote Sensing Terminals
n Primary and Secondary Referenced
Inhibit Functions
n Line Rejection > 60dB - DC to 50KHz
n External Synchronization Port
n Fault Tolerant Design
3
These converters are hermetically packaged in two
enclosure variations, utilizing copper core pins to minimize
resistive DC losses. Three lead styles are available, each
fabricated with International Rectifier’s rugged ceramic
lead-to-package seal assuring long term hermeticity in
the most harsh environments.
n Dual Output Versions Available
n Standard Microcircuit Drawing Available
Manufactured in a facility fully qualified to MIL-PRF-
38534, these converters are fabricated utilizing DSCC
qualified processes. For available screening options,
refer to device screening table in the data sheet.
Variations in electrical, mechanical and screening can
be accommodated. Contact IR Santa Clara for special
requirements.
www.irf.com
1
01/16/07