AH3382
HIGH VOLTAGE ULTRA HIGH SENSITIVITY HALL
EFFECT LATCH WITH INTERNAL PULL_UP RESISTOR
Description
Pin Assignments
The AH3382 is a high voltage ultra high sensitivity Hall Effect
Unipolar switch IC designed for proximity, position and level sensing
in industrial and consumer home appliances and personal care
applications. To support wide range of demanding applications, the
design has been optimized to operate over the supply range of 3.0V
to 28V. With chopper stabilized architecture and an internal bandgap
regulator to provide temperature compensated supply for internal
circuits, the AH3382 provides a reliable solution over the whole
operating range. For robustness and protection, the device has a
reverse blocking diode with a Zener clamp on the supply. The output
has an over current limit and a Zener clamp.
(TOP View)
3 OUTPUT
GND 2
1 VDD
SC59 and SOT23
The internally pulled-up output can be switched on with South pole of
sufficient strength. When the magnetic flux density (B) perpendicular
to the package is larger than the operate point (BOP) the output is
switched on (pulled low) and is held on until magnetic flux density B is
lower than the release point (BRP). The output remains switched off
for North pole fields to or no magnetic fields.
(TOP View)
3. OUTPUT
2. GND
VDD
1.
SIP-3 (Bulk Pack)
The magnetic operating and release polarity is opposite for SOT23
and SC59 packages. The SOT23 and SIP-3 (Ammo Pack), SIP-3
(Bulk Pack) packages will require south pole to the part marking side
to operate while SC59 will require south pole to the non-part marking
side.
Applications
Features
•
•
•
•
•
•
•
Position and Proximity Sensing in Industrial Applications
•
•
•
•
•
Unipolar Operation
Applications
High Sensitivity: BOP and BRP of +55G and +35G Typical
Internally Pull-up Resistor on the Output with Over Current Limit
3.0V to 28V Operating Voltage Range
Open and Close Detect
Position Detect
Level Detect
Chopper Stabilized Design Provides
Flow Meters
o
o
o
Superior Temperature Stability
Minimal Switch Point Drift
Contact-less Switches
Enhanced Immunity to Stress
•
•
•
•
•
•
Good RF Noise Immunity
Reverse Blocking Diode
Zener Clamp on Supply and Output Pins
-40C to +125C Operating Temperature
ESD: HBM ＞ 6kV
Industry Standard SC59, SOT23 and SIP-3 (Ammo Pack), SIP-3
(Bulk Pack) Packages
•
•
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
1 of 14
www.diodes.com
May 2018
© Diodes Incorporated
AH3382
Document number: DS38921 Rev. 2 - 2
5秒后页面跳转
TLP250光耦合器：资料手册参数分析
DA14580 低功耗蓝牙系统级芯片(SoC)：资料手册参数分析
INA226 高精度电流和功率监控器：资料手册参数分析
SI2302 N沟道MOSFET：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
