AG SERIES
ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS
100V to 6000V @ 1.0 and 1.5 Watts
PRODUCT SELECTION TABLE
Extremely Low Profile: 0.128 inches
and volume of < 0.100 cubic inches
*5
STANDARD 1 WATT -
AG MODEL
1.5 WATT OPTION -
AGH MODEL
VDC
MAXIMUM
MAXIMUM
MODEL
OUTPUT
MODEL
OUTPUT
CURRENT*1
CURRENT*1
*7
100 VDC
200 VDC
250 VDC
300 VDC
400 VDC
500 VDC
600 VDC
700 VDC
800 VDC
900 VDC
1000 VDC
1200 VDC
1500 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
6000 VDC
AG01
AG02
AG025
AG03
AG04
AG05
AG06
AG07
AG08
AG09
AG10
AG12
AG15
AG20
AG30
AG40
AG50
AG60
10 mA
5 mA
AGH01
AGH02
AGH025
AGH03
15 mA
7.5 mA
6 mA
4 mA
3.33 mA
2.5 mA
2 mA
5mA
AGH04 3.75 mA
AGH05
AGH06
AGH07
AGH08
AGH09
AGH10
AGH12
AGH15
AGH20
AGH30
–
3 mA
2.5 mA
2.15 mA
1.87 mA
1.67 mA
1.5 mA
1.25 mA
1 mA
PRODUCT DESCRIPTION
1.67 mA
1.43 mA
1.25 mA
1.1 mA
1 mA
The AG Series is a new line of ultra-miniature DC to HV DC converters
that set an industry standard in high voltage miniaturization. These
component-sized converters are ideal for applications requiring mini-
mal size and weight. Occupying less than one tenth of a cubic inch
of volume*5, this unique package features an extremely low profile of
only 0.128 inches (3.25mm) when mounted in from the top, or 0.152
(3.86mm) when mounted in from the bottom of the PCB! The AG Series
converter can also mount off the PCB with .030” diameter pins. See
page 9 for illustrations. Controllable output voltages range from 100
volts to 6000 volts. Please refer to the A Series data sheet for PCB
pin mounting.
0.83 mA
0.66 mA
0.5 mA
0.32 mA
0.24 mA
0.2 mA
0.75 mA
0.5 mA
–
–
–
0.167 mA AGH60
0.25 mA
Complete List of Models on page 2
FEATURES
APPLICATIONS
• Proportional Input/Output
• Low Noise Quasi-sinewave Oscillator
• Control Pin (can be used for on/off control)
• Low Leakage Current
• Low Input/Output Capacitance
• Input to Output Galvanic Isolation
• Short Circuit Protection, 1 Minute Minimum
• No Minimum Load Required*2
• MTBF > 1,862,000 hours, per Bellcore TR 332
• Surface Mount Package
Avalanche Photodiodes
Capacitor Charging
Electrophoresis
Photomultiplier Tubes
Piezo Devices
Mass Spectrometry
Sustaining Ion Pumps
OPTIONS
• No external components required
• RoHS Compliant
1 Watt and 1.5 Watt Versions Available (AG/AGH)
Available in 3 Standard Input Voltage Ranges: 0 to 5, 12 or 24VDC (up to 3 kV)
Polarity: Choose Positive or Negative Output (P/N)
• UL Recognized
Extended Operating Temperature (AG Models / 1.0W) (T Suffix)
Alternate Input / Output Voltages (Consult Factory)
E344664
See Ordering Information (Page 12)
WWW.XPPOWER.COM
4718L02
PAGE 1