A Series Crystal
¾ HC-49/U Thru-Hole Crystal
¾ RoHS Compliant Available
¾ Wide Frequency Range
¾ AT Cut
¾ Resistance Weld
ESR CHART:
ELECTRICAL SPECIFICATIONS:
Frequency Range
Frequency Tolerance /
Stability
1.8432MHz to 200.000MHz
(See Part Number Guide for Options)
Frequency Range
1.8432MHz to 1.999MHz
2.000MHz to 2.399MHz
2.400MHz to 2.999MHz
3.000MHz to 3.199MHz
3.200MHz to 3.499MHz
3.500MHz to 3.599MHz
3.600MHz to 3.999MHz
4.000MHz to 4.999MHz
5.000MHz to 5.999MHz
6.000MHz to 40.000MHz
24.000MHz to 75.000MHz
75.001MHz to 200.000MHz
ESR (Ohms)
800 Max
550 Max
350 Max
250 Max
200 Max
150 Max
120 Max
100 Max
70 Max
Mode / Cut
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
3rd OT / AT
5th OT /AT
Operating Temperature
Range
Storage Temperature
Aging
(See Part Number Guide for Options)
-55°C to +125°C
±5ppm / first year Max
7pF Max
Shunt Capacitance
20pF Standard
(See Part Number Guide for Options)
Load Capacitance
Equivalent Series Resistance
Mode of Operation
Drive Level
Shock
Solderability
Solvent Resistance
Vibration
Gross Leak Test
Fine Leak Test
See ESR Chart
Fundamental, 3rd OT or 5th OT
2mW Max
MIL-STD-883, Meth 2002, Cond B
MIL-STD-883, Meth 2003
MIL-STD-202, Meth 215
MIL-STD-883, Meth 2007, Cond A
MIL-STD-883, Meth 1014, Cond C
MIL-STD-883, Meth 1014, Cond A
40 Max
40 Max
100 Max
MECHANICAL DETAIL:
MARKING:
4.70 [.185]
MAX
13.46 [.530]
MAX
13.21 [.520]
MAX
Line 1: MXX.XXX
XX.XXX = Frequency in MHz
Line 2: SYMCCL
0.43 [.017]
4.88 [.192]
M XX.XXX
SYMCCL
11.20 [.441]
MAX
S = Internal Code
YM = Date Code (Year/Month)
CC = Crystal Parameters Code
L = Denotes RoHS Compliant
DIMENSIONS IN BRACKETS ARE IN INCHES
PART NUMBER GUIDE:
Frequency
A
HC-49/U
Mode of Operation
1 = Fundamental
3 = 3rd Overtone
5 = 5th Overtone
RoHS Compliant
Blank = Not Compliant
F = Is Compliant
Value Added Options
Temperature
Blank = No Added Options
I = Mylar Insulator Tab
L = 3rd Lead (Top of Can)
3 = 3 Lead Base
G = Gull-Wing
CLXXX = Cut Leads
Tolerance/Stability*
A = ±50 ppm / ±100 ppm
B = ±30 ppm / ±50 ppm
C = ±15 ppm / ±30 ppm
D = ±10 ppm / ±15 ppm
E = ±50 ppm / ±50 ppm
N = ±10 ppm / ±10 ppm
Load Capacitance
Operating Temperature
A = 0°C to +70°C
B = -20°C to +70°C
C = -40°C to +85°C **
S = Series
20 = 20pF (Standard)
XX = XXpF (8pF to 50pF)
XXX = Lead Length Code
* Please consult with MMD sales department for any other parameters or options.
** Not all Frequency Tolerance/Stability options available at this temperature range.
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Specifications subject to change without notice
Revision 5/11/06 H