l
LAMBDA ADVANCED ANALOG INC.
AFL12000S Series
Single Output, Hybrid - High Reliability
DC/DC Converters
DESCRIPTION
FEATURES
Lambda
requirements.
Advanced
Analog
with
specific
The AFL Series of DC/DC converters feature high
power density with no derating over the full military
temperature range. This series is offered as part of
a complete family of converters providing single and
dual output voltages and operating from nominal
+28, +50, +120 or +270 volt inputs and output power
ranging from 80 to 120 watts. For applications
requiring higher output power, individual converters
can be operated in parallel. The internal current
sharing circuits assure accurate current distribution
among the paralleled converters. This series
incorporates Lambda Advanced Analog's proprietary
magnetic pulse feedback technology providing
optimum dynamic line and load regulation response.
This feedback system samples the output voltage at
the pulse width modulator fixed clock frequency,
nominally 550 KHz. Multiple converters can be
synchronized to a system clock in the 500 KHz to
700 KHz range or to the synchronization output of
one converter. Undervoltage lockout, primary and
secondary referenced inhibit, soft-start and load
fault protection are provided on all models.
n
n
80 To 160 Volt Input Range
5, 8, 9, 12, 15, 24 and 28 Volt Outputs
Available
n
n
n
High Power Density - up to 84 W / in3
Up To 120 Watt Output Power
Parallel Operation with Stress and Current
Sharing
n
n
n
n
n
Low Profile (0.380") Seam Welded Package
Ceramic Feedthru Copper Core Pins
High Efficiency - to 87%
Full Military Temperature Range
Continuous Short Circuit and Overload
Protection
n
n
Remote Sensing Terminals
Primary and Secondary Referenced Inhibit
Functions
These converters are hermetically packaged in two
enclosure variations, utilizing copper core pins to
minimize resistive DC losses. Three lead styles are
available, each fabricated with Lambda Advanced
Analog's rugged ceramic lead-to-package seal
assuring long term hermeticity in the most harsh
environments.
n
n
n
n
n
Line Rejection > 50 dB - DC to 50 KHz
External Synchronization Port
Fault Tolerant Design
Dual Output Versions Available
Standard Military Drawings Available
Manufactured in a facility fully qualified to MIL-PRF-
38534, these converters are available in four
screening grades to satisfy a wide range of
requirements. The CH grade is fully compliant to
the requirements of MIL-PRF-38534 for class H.
The HB grade is fully processed and screened to the
class H requirement, may not necessarily meet all of
the other MIL-PRF-38534 requirements, e.g.,
element evaluation and Periodic Inspections (PI) not
required. Both grades are tested to meet the
complete group "A" test specification over the full
military temperature range without output power
deration. Two grades with more limited screening
are also available for use in less demanding
applications. Variations in electrical, mechanical
and screening can be accommodated. Contact
1