AFE031
SBOS531D –AUGUST 2010–REVISED MAY 2012
www.ti.com
ELECTRICAL CHARACTERISTICS: Digital
At TJ = +25°C, PA_VS = 16 V, VAVDD = VDVDD = 3.3 V, and 10 kΩ connected to PA_ISET (pin 46), unless otherwise noted.
AFE031
PARAMETER
Digital Inputs (SCLK, DIN, CS, DAC, SD)
Leakage input current
CONDITIONS
MIN
TYP
MAX
UNIT
0 ≤ VIN ≤ DVDD
–1
0.01
1
μA
Input logic levels
High-level input voltage
Low-level input voltage
VIH
VIL
0.7 • DVDD
V
V
0.3 • DVDD
SD pin high
SD > 0.7 • DVDD
SD < 0.3 • DVDD
DAC > 0.7 • DVDD
AFE031 in shutdown
SD pin low
AFE031 in normal operation
SPI access to DAC Register
DAC pin high
SPI access to Command and Data
Registers
DAC pin low
DAC < 0.3 • DVDD
Digital Outputs (DO, ZC_OUT)
High-level output voltage
Low-level output voltage
VO
H
IOH = 3 mA
IOL = –3 mA
DVDD – 0.4
GND
DVDD
V
V
VOL
GND + 0.4
Digital Outputs (INT, Tx_Flag, Rx_Flag)
High-level output current
Low-level output voltage
Low-level output current
INT pin high (open drain)
INT pin low (open drain)(1)
Tx_Flag high (open drain)
Tx_Flag low (open drain)
Rx_Flag high (open drain)
Rx_Flag low (open drain)
DIGITAL TIMING
IOH
VOL
IOL
VOH = 3.3 V
IOL = 4 mA
1
μA
V
0.4
VOL = 400 mV
4
mA
INT sink current < 1 μA
INT < 0.4 V
Normal operation
Indicates an interrupt has occurred
Indicates Tx block is ready
Tx_Flag sink current < 1 μA
Tx_Flag < 0.4 V
Indicates Tx block is not ready
Indicates Rx block is ready
Rx_Flag sink current < 1 μA
Rx_Flag < 0.4 V
Indicates Rx block is not ready
Gain Timing
Gain select time
0.2
μs
Shutdown Mode Timing
Enable time
4.0
2.0
μs
μs
Disable time
POR Timing
Power-On Reset power-up time
DVDD ≥ 2 V
50
μs
(1) When an interrupt is detected (INT pin low), the contents of the I_Flag and T_Flag Registers can be read to determine the reason for the
interrupt.
8
Copyright © 2010–2012, Texas Instruments Incorporated
Product Folder Link(s): AFE031