PRELIMINARY TECHNICAL DATA
SPI/I2CR Compatible, 10-Bit Digital Temperature
a
Preliminary Technical Data
Sensor and Quad Voltage Output 12/10/8-Bit DAC
ADT7316/7317/7318
FEATURES
GENERAL DESCRIPTION
ADT7316 - Four 12-Bit DACs
ADT7317 - Four 10-Bit DACs
ADT7318 - Four 8-Bit DACs
Buffered Voltage Output
The ADT7316/7317/7318 combines a 10-Bit Tempera-
ture-to-Digital Converter and a quad 12/10/8-Bit DAC
respectively, in a 16-Lead QSOP package. This includes a
bandgap temperature sensor and a 10-bit ADC to monitor
and digitize the temperature reading to a resolution of
0.25 oC. The ADT7316/17/18 operates from a single
+2.7 V to + 5.5 V supply. The output voltage of the DAC
ranges from 0 V to VDD , with an output voltage settling
time of typ 7 msec. The ADT7316/17/18 provides two
serial interface options, a four-wire serial interface which
is compatible with SPITM, QSPITM, MICROWIRETM and
DSP interface standards; and a two-wire I2C interface. It
features a standby mode that is controlled via the serial
interface.
Guaranteed Monotonic By Design Over All Codes
10-Bit Temperature to Digital Converter
Temperature range:
-40oC to +125oC
Temperature Sensor Accuracy of 2oC
Supply Range : + 2.7 V to + 5.5 V
DAC Output Range: 0 - VREF
Power-Down Current 1µA
Internal 2.25 VRef Option
Double-BufferedInputLogic
Buffered / Unbuffered Reference Input Option
Power-on Reset to Zero Volts
Simultaneous Update of Outputs (LDAC Function)
On-Chip Rail-to-Rail Output Buffer Amplifier
The reference for the four DACs is derived either inter-
nally or from two reference pins (one per DAC pair) .The
outputs of all DACs may be updated simultaneously using
the software LDAC function or external LDAC pin. The
ADT7316/7317/7318 incorporates a power-on-reset cir-
cuit, which ensures that the DAC output powers-up to
zero volts and it remains there until a valid write takes
place.
I2C, SPITM, QSPITM, MICROWIRETM and DSP-Compatible 5-
wire Serial Interface
16-Lead TSSOP Package
APPLICATIONS
Portable Battery Powered Instruments
Personal Computers
TelecommunicationsSystems
Electronic Test Equipment
Domestic Appliances
The ADT7316/7317/7318’s wide supply voltage range,
low supply current and SPI/I2C-compatible interface,
make it ideal for a variety of applications, including per-
sonal computers, office equipment and domestic appli-
ances.
V
AB
REF
Process Control
2.25 V V
REF
INTERNAL
REFERENCE
GAIN-
SELECT
L OGIC
LD A C
LDAC
FUNCTIONAL BLOCK DIAGRAM
INPUT & DAC
REGISTER
STRING
DAC A
V
V
V
A
B UFFER
BUFFER
OUT
INPUT & DAC
REGISTER
STRING
DAC B
B
OUT
INPUT & DAC
REGISTER
STRING
DAC C
C
D
BUFFER
BUFFER
O UT
CS
INTERFACE
L OGIC
STRIN G
DAC D
INPUT & DAC
REGISTER
V
SCL/SCL K
O UT
SDA/D
IN
POWER-DOWN
LOGIC
ON-CHIP
TEMP.
SENSOR
D
/ADD
OUT
2.25 V V
REF
ANALOG
MUX
V
CD
REF
ADDRESS
REGISTER
L IMIT
COMPARATOR
TEMP VALU E
REGISTER
GND
CONFIG.
REGISTER
A/D
CONVERTER
T
MASK
HIGH
V
DD
T
STATUS
LOW
D+ D-
/
ALERT O TI
I2C is a registered trademark of Philips Corporation
* Protected by U.S. Patent No. 5,969,657; other patents pending.
SPI and QSPI are trademarks of Motorola, INC.
MICROWIREisatrademarkofNationalSemiconductorCorporation.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
REV. PrH 07/’01
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
Tel: 781/329-4700
Fax: 781/326-8703
World Wide Web Site: http://www.analog.com
Analog Devices, Inc., 2001