± ±0.25°C AAcurateCꢀ16-Ba
DBgBarlCSPICTtmpturacutCStnsou
PutlBmBnruyCTtAhnBArlCDrarC
DT73.±
FEATURES
GENERAL DESCRIPTION
Temperature accuracy 0.2ꢀ°C from −20°C to +10ꢀ°C
13- or 16-bit user-selectable temperature-to-digital
converter
The ADT7320 is a high accuracy digital temperature sensor
offering breakthrough performance over a wide industrial range,
housed in an LFCSP package. It contains a band gap temperature
reference and a 13-bit analog-to-digital converter (ADC) to
monitor and digitize the temperature to a 0.0625°C resolution.
The ADC resolution, by default, is set to 13 bits (0.0625°C).
This can be changed to 16 bits (0.0078°C) by setting Bit 7 in the
configuration register (Register Address 0x01).
Low drift silicon temperature sensor
No temperature calibration/correction required by user
Power saving 1 sample per second (SPS) mode
Fast first conversion on power-up of 6 ms
SPI-compatible interface
Operating temperature from −40°C to +1ꢀ0°C
Operating voltage: 2.7 V to ꢀ.ꢀ V
The ADT7320 is guaranteed to operate over supply voltages from
2.7 V to 5.5 V. Operating at 3.3 V, the average supply current is
typically 210 μA. The ADT7320 has a shutdown mode that
powers down the device and offers a shutdown current of
typically 2 μA. The ADT7320 is rated for operation over the
−40°C to +150°C temperature range.
Critical overtemperature indicator
Programmable overtemperature/undertemperature interrupt
Low power consumption: 700 μW typical at 3.3 V
Shutdown mode for lower power: 7 μW typical at 3.3 V
16-lead RoHS-compliant LFCSP package
APPLICATIONS
The CT pin is an open-drain output that becomes active when
the temperature exceeds a programmable critical temperature
limit. The default critical temperature limit is 147°C. The INT
pin is also an open-drain output that becomes active when the
temperature exceeds a programmable limit. The INT and CT
pins can operate in either comparator or interrupt mode.
RTD and thermistor replacement
Medical equipment
Cold junction compensation
Industrial controls and test
Food transportation and storage
Environmental monitoring and HVAC
FUNCTIONAL BLOCK DIAGRAM
1
2
3
4
SCLK
DOUT
ADT7320
INTERNAL
OSCILLATOR
INTERNAL
REFERENCE
DIN
CS
6
5
CT
T
T
T
CRIT
HIGH
LOW
Σ-Δ
MODULATOR
TEMPERATURE
SENSOR
TEMPERATURE
VALUE
CONFIGURATION
AND STATUS
REGISTERS
INT
REGISTER
T
T
HYST
REGISTER
CRIT
REGISTER
FILTER
LOGIC
7
8
GND
T
T
HIGH
REGISTER
LOW
REGISTER
V
DD
Figure 1.
Rev. PrA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2010 Analog Devices, Inc. All rights reserved.