ADS7038-Q1
SBAS981A – MAY 2020 – REVISED NAODVESM7B0E3R82-Q0210
SBAS981A – MAY 2020 – REVISED NOVEMBER 2020
www.ti.com
ADS7038-Q1 Small, 8-Channel, 12-Bit ADC with SPI Interface, GPIOs, and CRC
1 Features
2 Applications
•
AEC-Q100 qualified for automotive applications:
– Temperature grade 1: –40°C to +125°C, TA
Small package size:
•
•
•
•
Battery management systems (BMS)
Automotive cluster displays
Inverter and motor controls
•
– WQFN 3 mm × 3 mm
Onboard (OBC) and wireless chargers
– Wettable flanks for visual inspection of solder
joints
8 channels configurable as any combination of:
– Up to 8 analog inputs, digital inputs, or digital
outputs
GPIOs for I/O expansion:
– Open-drain, push-pull digital outputs
Analog watchdog:
3 Description
The ADS7038-Q1 is an easy-to-use, 8-channel,
multiplexed,
•
12-bit,
1-MSPS,
successive
approximation register analog-to-digital converter
(SAR ADC). The eight channels can be independently
configured as either analog inputs, digital inputs, or
digital outputs. The device has an internal oscillator
for the ADC conversion process.
•
•
– Programmable thresholds per channel
– Event counter for transient rejection
Wide operating ranges:
– AVDD: 2.35 V to 5.5 V
– DVDD: 1.65 V to 5.5 V
Enhanced-SPI digital interface:
– High-speed, 60-MHz interface
CRC for read/write operation:
– CRC on data read/write
– CRC on power-up configuration
Programmable averaging filters:
– Programmable sample size for averaging
– Averaging with internal conversions
– 16-bit resolution
The ADS7038-Q1 communicates through an SPI-
compatible interface and operates in either
autonomous or single-shot conversion mode. The
ADS7038-Q1 implements the analog watchdog
function by event-triggered interrupts per channel
using a digital window comparator with programmable
high and low thresholds, hysteresis, and an event
counter. The ADS7038-Q1 has a built-in cyclic
redundancy check (CRC) for data read/write
operations and the power-up configuration.
•
•
•
Device Information (1)
•
•
PART NUMBER
PACKAGE
BODY SIZE (NOM)
ADS7038-Q1
WQFN (16)
3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Turbo comparator mode with speeds up to
3.2 MSPS
Example System Architecture
Device Block Diagram
AVDD
DECAP
VCC
AVDD
High/Low Threshold
8 x Hysteresis
DVDD
Digital Window
Comparator
OVP
AIN0/GPIO0
AIN1/GPIO1
AIN2/GPIO2
AIN3/GPIO3
AIN4/GPIO4
AIN5/GPIO5
AIN6/GPIO6
AIN7/GPIO7
Programmable
Averaging Filters
ADC
MUX
ADC
GPIO
OCP
CS
MUX
SPI Interface
SCLK
SDI
Sequencer
Pin CFG
and
CRC
Verification
SDO
GPO Write
GPI Read
OVP: Over voltage protection
OCP: Over current protection
GND
ADS7038-Q1 Block Diagram and Applications
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: ADS7038-Q1
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1