ADS131E04
ADS131E06
ADS131E08
www.ti.com
SBAS561A –JUNE 2012–REVISED APRIL 2013
ELECTRICAL CHARACTERISTICS
Minimum and maximum specifications apply from –40°C to +105°C. Typical specifications are at +25°C. All specifications are
at DVDD = 1.8 V, AVDD = 3 V, AVSS = 0 V, VREF = 2.4 V, external fCLK = 2.048 MHz, data rate = 8 kSPS, and gain = 1,
unless otherwise noted.
ADS131E0x
PARAMETER
ANALOG INPUTS
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Full-scale differential input voltage
(AINP – AINN)
±VREF / gain
V
See the Input Common-Mode
Range subsection of the PGA
Settings and Input Range section
Input common-mode range
Ci
IIB
Input capacitance
Input bias current
DC input impedance
20
5
pF
nA
PGA output in normal range
200
MΩ
PGA PERFORMANCE
Gain settings
1, 2, 4, 8, 12
See
Table 3
BW
Bandwidth
ADC PERFORMANCE
Data rates up to 16 kSPS
32- and 64-kSPS data rate
fCLK = 2.048 MHz
24
16
Bits
Bits
Resolution
DR
Data rate
1
64
kSPS
CHANNEL PERFORMANCE (DC Performance)
INL
Integral nonlinearity
Dynamic range
Full-scale, best fit
G = 1
10
ppm
dB
105
Gain settings other than 1
See Noise Measurements section
EO
EG
Offset error
350
0.65
0.1
3
μV
μV/°C
%
Offset error drift
Gain error
Excluding voltage reference error
Excluding voltage reference drift
Gain drift
ppm/°C
% of FS
Gain match between channels
0.2
CHANNEL PERFORMANCE (AC Performance)
CMRR Common-mode rejection ratio
PSRR Power-supply rejection ratio
Crosstalk
fCM = 50 Hz and 60 Hz(1)
fPS = 50 Hz and 60 Hz
fIN = 50 Hz and 60 Hz
–110
–80
dB
dB
dB
–110
AVDD = 3V, VREF
= 2.4V
0.04
%
%
3000:1 dynamic range with a 1-second
Accuracy
measurement (VRMS / IRMS
)
AVDD = 5 V, VREF
= 4V
0.025
SNR
THD
Signal-to-noise ratio
fIN = 50 Hz and 60 Hz, gain = 1
10 Hz, –0.5 dBFs
107
–93
dB
dB
Total harmonic distortion
FAULT DETECT AND ALARM
Comparator threshold accuracy
EXTERNAL REFERENCE
±30
mV
AVDD = 3 V, VREF = (VREFP – VREFN)
AVDD = 5 V, VREF = (VREFP – VREFN)
2
2
2.5
4
AVDD
AVDD
V
V
V
Reference input voltage
VREFN Negative input
VREFP Positive input
Input impedance
AVSS
AVDD –
2.5
AVSS +
2.5
AVDD
V
6
kΩ
(1) CMRR is measured with a common-mode signal of (AVSS + 0.3 V) to (AVDD – 0.3 V). The values indicated are the minimum of the
eight channels.
Copyright © 2012–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: ADS131E04 ADS131E06 ADS131E08