ADS1282
www.ti.com ................................................................................................................................................. SBAS418D–SEPTEMBER 2007–REVISED JULY 2008
High-Resolution Analog-to-Digital Converter
1
FEATURES
DESCRIPTION
2
•
High Resolution:
The ADS1282 is an extremely high-performance,
single-chip analog-to-digital converter (ADC) with an
integrated, low-noise programmable gain amplifier
(PGA) and two-channel input multiplexer (MUX). The
ADS1282 is suitable for the demanding needs of
130dB SNR (250SPS, High-Resolution Mode)
127dB SNR (250SPS, Low-Power Mode)
•
High Accuracy:
THD: –122dB
INL: 0.5ppm
energy
exploration
and
seismic
monitoring
environments.
•
•
•
Low-Noise PGA
The converter uses a fourth-order, inherently stable,
delta-sigma (ΔΣ) modulator that provides outstanding
noise and linearity performance. The modulator is
used either in conjunction with the on-chip digital
filter, or can be bypassed for use with post
processing filters.
Two-Channel Input MUX
Inherently-Stable Modulator with Fast
Responding Over-Range Detection
•
Flexible Digital Filter:
Sinc + FIR + IIR (Selectable)
Linear or Minimum Phase Response
Programmable High-Pass Filter
Selectable FIR Data Rates: 250SPS to 4kSPS
The flexible input MUX provides an additional
external input for measurement, as well as internal
self-test connections. The PGA features outstanding
low noise (5nV/√Hz) and high input impedance,
allowing easy interfacing to geophones and
hydrophones over a wide range of gains.
•
•
Filter Bypass Option
Low Power Consumption:
High-Resolution Mode: 25mW
Low-Power Mode: 17mW
Shutdown: 10µW
The digital filter provides selectable data rates from
250 to 4000 samples per second (SPS). The
high-pass filter (HPF) features an adjustable corner
frequency. On-chip gain and offset scaling registers
support system calibration.
•
•
•
Offset and Gain Calibration Engine
SYNC Input
Analog Supply:
Unipolar (+5V) or Bipolar (±2.5V)
The synchronization input (SYNC) can be used to
synchronize the conversions of multiple ADS1282s.
The SYNC input also accepts a clock input for
continuous alignment of conversions from an external
source.
•
Digital Supply: 1.8V to 3.3V
APPLICATIONS
Two operating modes allow optimization of noise and
power. Together, the amplifier, modulator, and filter
dissipate 25mW and only 17mW in low-power mode.
The ADS1282 is available in a compact TSSOP-28
package and is fully specified from –40°C to +85°C,
with a maximum operating range to +125°C.
•
•
•
Energy Exploration
Seismic Monitoring
High-Accuracy Instrumentation
AVDD
VREFN VREFP
DVDD
CLK
ADS1282
SCLK
DOUT
DIN
Input 1
Input 2
4th-Order
DS
Programmable
Digital Filter
SPI
PGA
Calibration
Interface
Modulator
DRDY
VCOM
Over-Range
SYNC
RESET
PWDN
Control
Modulator Output
3
AVSS
DGND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2008, Texas Instruments Incorporated