ADS1243-HT
www.ti.com
SBAS525 –DECEMBER 2011
24-BIT ANALOG-TO-DIGITAL CONVERTER
Check for Samples: ADS1243-HT
1
FEATURES
2
•
24-Bits No Missing Codes
SUPPORTS EXTREME TEMPERATURE
APPLICATIONS
•
Simultaneous 50-Hz and 60-Hz Rejection
(–90 dB Minimum)
•
•
•
•
Controlled Baseline
One Assembly/Test Site
One Fabrication Site
•
•
•
•
•
•
•
•
•
•
•
0.0025% INL
PGA Gains From 1 to 128
Single-Cycle Settling
Available in Extreme (–55°C/210°C)
Temperature Range(1)
Programmable Data Output Rates
External Differential Reference of 0.1 V to 5 V
On-Chip Calibration
•
•
•
•
Extended Product Life Cycle
Extended Product-Change Notification
Product Traceability
SPI™ Compatible
Texas Instruments’ high temperature products
utilize highly optimized silicon (die) solutions
with design and process enhancements to
maximize performance over extended
temperatures. All devices are characterized
and qualified for 1000 hours of continuous
operating life at maximum rated temperatures.
2.7 V to 5.25 V Supply Range
600-µW Power Consumption
Up to Eight Input Channels
Up to Eight Data I/O
APPLICATIONS
•
•
•
•
•
•
Down-Hole Drilling
VDD
VREF+
VREF–
XIN
XOUT
High Temperature Environments
Vibration/Modal Analysis
Multi-Channel Data Acquisition
Acoustics/Dynamic Strain Gauges
Pressure Sensors
VDD
Clock Generator
2µA
Offset
DAC
AIN0/D0
AIN1/D1
AIN2/D2
AIN3/D3
AIN4/D4
AIN5/D5
AIN6/D6
AIN7/D7
A = 1:128
PGA
IN+
IN–
2nd-Order
Modulator
Digital
MUX
+
Controller
Registers
BUF
Filter
SCLK
DIN
Serial Interface
2µA
DOUT
GND
CS
GND
PDWN
DRDY
(1) Custom temperature ranges available
DESCRIPTION
The ADS1243 is a precision, wide dynamic range, delta-sigma, analog-to-digital (A/D) converter with 24-bit
resolution operating from 2.7-V to 5.25-V supplies. This delta-sigma, A/D converter provides up to 24 bits of no
missing code performance and effective resolution of 21 bits.
The input channels are multiplexed. Internal buffering can be selected to provide a very high input impedance for
direct connection to transducers or low-level voltage signals. Burnout current sources are provided that allow for
the detection of an open or shorted sensor. An 8-bit digital-to-analog converter (DAC) provides an offset
correction with a range of 50% of the FSR (Full-Scale Range).
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated