Sample &
Buy
Support &
Community
Reference
Design
Product
Folder
Tools &
Software
Technical
Documents
ADS1148-Q1
SBAS674A –JULY 2014–REVISED SEPTEMBER 2016
ADS1148-Q1 Automotive,16-Bit, 2-kSPS, Analog-to-Digital Converter with Integrated
Programmable Gain Amplifier (PGA), Reference, and Oscillator
1 Features
3 Description
The ADS1148-Q1 is a highly-integrated, precision,
16-bit analog-to-digital converter (ADC) that includes
many integrated features to reduce system cost and
1
•
Qualified for Automotive Applications
•
AEC-Q100 Qualified with the Following Results:
–
–
–
Temperature Grade 1: –40°C to +125°C
HBM ESD Classification 2
component
count
for
sensor
measurement
low-noise,
applications. The device features
a
programmable gain amplifier (PGA), a precision
delta-sigma (ΔΣ) ADC with a single-cycle settling
digital filter, and an internal oscillator. The
ADS1148-Q1 integrates a low-drift voltage reference,
and two matched programmable excitation current
sources (IDACs).
CDM ESD Classification C5
•
•
•
•
Programmable Gain: 1 V/V to 128 V/V
Programmable Data Rates: 5 SPS to 2 kSPS
Single-Cycle Settling for All Data Rates
Analog Multiplexer With 8 Independently
Selectable Inputs
The device offers a fully flexible multiplexer that
allows both positive and negative inputs to be
selected independently. In addition, the multiplexer
integrates sensor burn-out detection, voltage bias for
thermocouples, system monitoring, and eight general-
purpose digital I/Os (GPIOs). The PGA provides
selectable gains up to 128 V/V. These features
provide a complete front-end solution for temperature
•
Dual-Matched Programmable Excitation Current
Sources: 50 µA to 1.5 mA
•
•
•
•
•
•
•
•
•
Internal 2.048-V Voltage Reference
Internal 4.096-MHz Oscillator
Internal Temperature Sensor
Open Sensor Detection
sensor
measurement
applications,
and
including
resistance
thermocouples,
thermistors,
Power-Supply and External Reference Monitoring
Self and System Calibration
temperature detectors (RTDs), and other small-signal
measurements. The digital filter settles in a single
cycle to support fast channel cycling when using the
input multiplexer and provides data rates up to
2 kSPS. For data rates of 20 SPS or less, both the
50-Hz and 60-Hz interference are rejected by the
filter.
8 General-Purpose I/Os
SPI-Compatible Serial Interface
Analog Supply: Unipolar (2.7 V to 5.25 V) or
Bipolar (±2.5 V)
•
Digital Supply: 2.7 V to 5.25 V
Device Information(1)
2 Applications
PART NUMBER
PACKAGE
BODY SIZE (NOM)
•
Thermocouple-, RTD- and Thermistor-
ADS1148-Q1
TSSOP (28)
9.70 mm × 4.40 mm
Based Temperature Measurement Systems
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
•
•
•
Exhaust Gas Sensing (Soot, NOx, NH3, O2)
Battery Management Systems (BMS)
Multichannel Voltage and Current Monitoring
Functional Block Diagram
REFP0/ REFN0/
AVDD
GPIO0 GPIO1 REFP1 REFN1 REFOUT REFCOM
DVDD
Burnout
Detect
Voltage
Reference Mux
Reference
VBIAS
GPIO
SCLK
AIN0/IEXC
AIN1/IEXC
System
Monitor
DIN
Serial
DRDY
DOUT/DRDY
CS
AIN2/IEXC/GPIO2
AIN3/IEXC/GPIO3
3rd-Order
Digital
Filter
Interface
and
Input
Mux
PGA
DS
Modulator
AIN4/IEXC/GPIO4
AIN5/IEXC/GPIO5
Control
START
RESET
AIN6/IEXC/GPIO6
AIN7/IEXC/GPIO7
IDACs
Internal Oscillator
Burnout
Detect
ADS1148-Q1
AVSS IEXC1 IEXC2
CLK
DGND
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.