ADS1158
www.ti.com ............................................................................................................................................................. SBAS429A–JUNE 2008–REVISED JUNE 2008
16-Channel, 16-Bit Analog-to-Digital Converter
1
FEATURES
DESCRIPTION
23
•
16 Bits, No Missing Codes
The ADS1158 is
a
16-channel (multiplexed),
low-noise, 16-bit, delta-sigma (ΔΣ) analog-to-digital
converter (ADC) that provides single-cycle settled
data at channel scan rates from 1.8k to 23.7k
samples per second (SPS) per channel. A flexible
input multiplexer accepts combinations of eight
differential or 16 single-ended inputs with a full-scale
differential range of 5V or true bipolar range of ±2.5V
when operating with a 5V reference. The fourth-order
delta-sigma modulator is followed by a fifth-order sinc
digital filter optimized for low-noise performance.
•
•
•
•
•
•
•
•
Fixed-Channel or Automatic Channel Scan
Fixed-Channel Data Rate: 125kSPS
Auto-Scan Data Rate: 23.7kSPS/Channel
Single-Conversion Settled Data
16 Single-Ended or 8 Differential Inputs
Unipolar (+5V) or Bipolar (±2.5V) Operation
0.3LSB (INL)
DC Stability:
0.02µV/°C Offset Drift, 0.4ppm/°C Gain Drift
The differential output of the multiplexer is accessible
to allow signal conditioning before the input of the
ADC. Internal system monitor registers provide
supply voltage, temperature, reference voltage, gain,
and offset data.
•
•
•
Open-Sensor Detection
Conversion Control Pin
Multiplexer Output for External Signal
Conditioning
An onboard PLL generates the system clock from a
32.768kHz crystal, or can be overridden by an
external clock source. A buffered system clock output
(15.7MHz) is provided to drive a microcontroller or
additional converters.
•
On-Chip Temperature, Reference, Offset, Gain,
and Supply Voltage Readback
•
•
•
•
42mW Power Dissipation
Standby, Sleep, and Power-Down Modes
Eight General-Purpose Inputs/Outputs (GPIO)
32.768kHz Crystal Oscillator or External Clock
Serial digital communication is handled via an
SPI™-compatible interface. A simple command word
structure controls channel configuration, data rates,
digital I/O, monitor functions, etc.
APPLICATIONS
Programmable sensor bias current sources can be
used to bias sensors or verify sensor integrity.
•
•
•
•
•
Medical, Avionics, and Process Control
Machine and System Monitoring
Fast Scan Multi-Channel Instrumentation
Industrial Systems
The ADS1158 operates from a unipolar +5V or
bipolar ±2.5V analog supply and a digital supply
compatible with interfaces ranging from 2.7V to
5.25V. The ADS1158 is available in a QFN-48
package.
Test and Measurement Systems
AVDD
VREF
DVDD
GPIO[7:0]
Internal
Monitoring
ADS1158
GPIO
CS
1
DRDY
SCLK
DIN
16-Bit
ADC
Digital
Filter
SPI
Interface
16:1
Analog Inputs
Analog
Input
MUX
DOUT
START
RESET
PWDN
16
AINCOM
Oscillator
Control
AVSS
MUX
OUT
ADC
IN
Ext CLK
In/Out
DGND
32.768kHz
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
SPI is a trademark of Motorola, Inc.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008, Texas Instruments Incorporated