Silicon SPDT Switch, Nonreflective,
9 kHz to 44 GHz
Data Sheet
ADRF5027
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Ultrawideband frequency range: 9 kHz to 44 GHz
Nonreflective design
Low insertion loss
1.1 dB to 18 GHz
1.5 dB to 26 GHz
2.2 dB to 40 GHz
3.8 dB to 44 GHz
High isolation
53 dB to 18 GHz
GND
GND
RFC
GND
GND
1
2
3
4
5
15 VSS
14 EN
50Ω
50Ω
DRIVER
13 GND
12 CTRL
11 VDD
48 dB to 26 GHz
48 dB to 40 GHz
43 dB to 44 GHz
Figure 1.
High input linearity
P1dB: 26 dBm typical
IP3: 54 dBm typical
High power handling
24 dBm insertion loss path
24 dBm isolation path
All off state control
No low frequency spurious signals
0.1 dB RF settling time: 6.0 µs typical
20-terminal, 3 mm × 3 mm LGA package
Pin compatible with ADRF5026, fast switching version
APPLICATIONS
Industrial scanners
Test and instrumentation
Cellular infrastructure: 5G mmWave
Military radios, radars, electronic counter measures (ECMs)
Microwave radios and very small aperture terminals (VSATs)
GENERAL DESCRIPTION
The ADRF5027 is a nonreflective, single-pole, double-throw
(SPDT) radio frequency (RF) switch manufactured in a silicon
process.
The ADRF5027 is pin compatible with the ADRF5026 fast
switching version, which operates from 100 MHz to 44 GHz.
The ADRF5027 RF ports are designed to match a characteristic
impedance of 50 Ω. For ultrawideband products, impedance
matching on the RF transmission lines can further optimize
high frequency insertion loss and return loss characteristics.
Refer to the Narrow-Band Impedance Matching section for an
example of a matched circuit that achieves a low insertion loss
response of 2.2 dB from 28 GHz to 43 GHz.
The ADRF5027 operates from 9 kHz to 44 GHz with better
than 3.8 dB of insertion loss and 43 dB of isolation. The
ADRF5027 features an all off control, where both RF ports are
in an isolation state. The ADRF5027 has a nonreflective design
and both of the RF ports are internally terminated to 50 Ω.
The ADRF5027 requires a dual-supply voltage of +3.3 V and
−3.3 V. The device employs complimentary metal-oxide
semiconductor/low-voltage transistor-transistor logic
(CMOS/LVTTL) logic-compatible controls.
The ADRF5027 comes in a 20-terminal, 3 mm × 3 mm, RoHS-
compliant, land grid array (LGA) package and can operate from
−40°C to +105°C.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2018 Analog Devices, Inc. All rights reserved.
www.analog.com