–28 V, −200 mA, Low Noise, Linear
Regulator
Data Sheet
ADP7182
FEATURES
TYPICAL APPLICATION CIRCUITS
C
2.2µF
C
OUT
2.2µF
Low noise: 18 µV rms
Power supply rejection ratio (PSRR): 66 dB at 10 kHz at VOUT = −3V
Positive or negative enable logic
Stable with small 2.2 µF ceramic output capacitor
Input voltage range: −2.7 V to −28 V
Maximum output current: −200 mA
Low dropout voltage: −185 mV at −200 mA load
Initial accuracy: 1%
IN
GND
V
= –8V
ON
V
= –5V
OUT
VIN
VOUT
IN
ADP7182
2V
OFF
–2V
0V
EN
NC
ON
Figure 1. ADP7182 with Fixed Output Voltage, VOUT = −5 V
Accuracy over line, load, and temperature
+2% maximum/−3% minimum
Low quiescent current, IGND = −650 µA with −200 mA load
Low shutdown current: −2 µA
C
2.2µF
C
OUT
2.2µF
IN
13kΩ
GND
40.2kΩ
Adjustable output from −1.22 V to −VIN + VDO
Current-limit and thermal overload protection
8-lead LFCSP and 5-lead TSOT
V
= –8V
V
= –5V
VIN
VOUT
IN
OUT
ADP7182
ON
2V
0V
OFF
–2V
EN
ADJ
ON
APPLICATIONS
Figure 2. ADP7182 with Adjustable Output Voltage, VOUT = −5 V
Regulation to noise sensitive applications
Analog-to-digital converter (ADC) and digital-to-analog
converter (DAC) circuits, precision amplifiers
Communications and infrastructure
Medical and healthcare
Industrial and instrumentation
GENERAL DESCRIPTION
The ADP7182 is a CMOS, low dropout (LDO) linear regulator
that operates from −2.7 V to −28 V and provides up to −200 mA
of output current. This high input voltage LDO is ideal for
regulation of high performance analog and mixed signal circuits
operating from −27 V down to −1.22 V rails. Using an advanced
proprietary architecture, it provides high power supply rejection
and low noise, and achieves excellent line and load transient
response with a small 2.2 µF ceramic output capacitor.
The ADP7182 is available in a fixed output voltage and an
adjustable version that allows the output voltage to range from
−1.22 V to −VIN + VDO via an external feedback divider.
The ADP7182 regulator output noise is 18 µV rms independent
of the output voltage. The enable logic is capable of interfacing
with positive or negative logic levels for maximum flexibility.
The ADP7182 is available in an 8-lead LFCSP package for a
small, low profile footprint. The 5-lead TSOT package is
scheduled for release by the end of 2013.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2013 Analog Devices, Inc. All rights reserved.
www.analog.com