Very Low Quiescent Current,
150 mA, LDO Regulator
ADP165/ADP166
Data Sheet
FEATURES
TYPICAL APPLICATION CIRCUITS
ADP165/ADP166
Very low quiescent current
V
= 2.3V
1µF
V
= 1.8V
IN
OUT
1
2
3
VIN
GND
EN
VOUT
5
I
I
Q = 590 nA with 0 µA load
Q = 890 nA with 1 µA load
1µF
Maintains very low quiescent current in dropout (pass
through mode)
IQ_DROP = 720 nA with 0 µA load
ON
4
NC
OFF
NOTES
I
Q_DROP = 1200 nA with 1 µA load
1. NC = NO CONNECT. NOT CONNECTED INTERNALLY.
Stable with 1 µF ꢀ0% ceramic input and output capacitors
Maximum operating load current (ILOAD_MAX): 150 mA
Input voltage range: 2.2 V to 5.5 V
Figure 1. 5-Lead TSOT ADP165/ADP166 with Fixed Output Voltage, 1.8 V
ON
EN 4
3 GND
OFF
Low shutdown current: 50 nA typical
Low dropout voltage: 120 mV at 150 mA load
Initial output voltage accuracy: 1%
Accuracy over line, load, and temperature: ꢀ.5%
7 fixed output voltage options: 1.2 V to ꢀ.ꢀ V
Adjustable output option can be set from 1.0 V to 4.2 V
PSRR: 72 dB at 100 Hz, VOUT = 1.2 V
ADP165/
ADP166
NC
5
2 NC
V
= 2.3V
1µF
V
= 1.8V
IN
OUT
VIN 6
1 VOUT
1µF
NOTES
1. NC = NO CONNECT. NOT CONNECTED INTERNALLY.
Figure 2. 6-Lead, 2 mm × 2 mm LFCSP ADP165/ADP166 with Fixed Output
Voltage, 1.8 V
Current-limit and thermal overload protection
Logic control enable
ADP165/ADP166
1
2
Integrated output discharge resistor
Three package options
5-lead TSOT package
6-lead, 2 mm × 2 mm LFCSP
4-ball, 0.5 mm pitch WLCSP
V
= 1.8V
V
= 2.3V
1µF
OUT
IN
VIN
VOUT
A
B
1µF
TOP VIEW
(Not to Scale)
ON
EN
GND
OFF
APPLICATIONS
Figure 3. 4-Ball WLCSP ADP165/ADP166 with Fixed Output Voltage, 1.8 V
Portable and battery-powered equipment
Post dc-to-dc regulation
Portable medical devices
Wireless sensor network (WSN) devices
GENERAL DESCRIPTION
The ADP165/ADP166 are very low quiescent current, low
dropout (LDO), linear regulators that operate from 2.2 V to 5.5 V
and provide up to 150 mA of output current. The low 120 mV
dropout voltage at a 150 mA load improves efficiency and allows
operation over a wide input voltage range.
The ADP165/ADP166 are available in seven fixed output
voltage options, ranging from 1.2 V to 3.3 V, and an adjustable
output option. The ADP165 also includes a switched resistor to
discharge the output automatically when the LDO is disabled.
The ADP166 is identical to the ADP165, but it does not include
the output discharge function.
The ADP165/ADP166 are specifically designed for stable operation
with a tiny 1 µF 30% ceramic input and output capacitors to
meet the requirements of high performance, space constrained
applications.
Short-circuit and thermal overload protection circuits prevent
damage in adverse conditions. The ADP165/ADP166 are
available in a tiny 5-lead TSOT, a 6-lead LFCSP, and a 4-ball,
0.5 mm pitch WLCSP package for the smallest footprint
solution to meet a variety of portable power applications.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.ꢀ29.4700
Technical Support
©2014 Analog Devices, Inc. All rights reserved.
www.analog.com