Microprocessor Supervisory
Circuit in 4-Lead SC70
Data Sheet
ADM6711/ADM6713
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
Specified over temperature
Low power consumption (12 μA)
Precision monitoring of 2.5 V, 3 V, 3.3 V,
and 5 V power supply voltages
Reset timeout period of 140 ms (minimum)
Manual reset input
ADM6711
V
RESET
CC
GENERATOR
240ms
RESET
GND
V
REF
MR
DEBOUNCE
Output stages
Push-pull RESET output (ADM6711)
Open-drain RESET output (ADM6713)
Reset assertion down to 1 V VCC
Power supply glitch immunity
4-lead SC70 package
Figure 1.
ADM6713
V
CC
RESET
GENERATOR
240ms
RESET
GND
V
REF
APPLICATIONS
Microprocessor systems
Computers
MR
DEBOUNCE
Controllers
Intelligent instruments
Automotive systems
Figure 2.
GENERAL DESCRIPTION
The ADM6711/ADM6713 are reset generator circuits suitable
for use in microprocessor-based systems. They provide a reset
signal on power-up, power-down, and whenever the supply
voltage falls below a preset threshold. In addition, both parts
have a debounced manual reset input so that a reset signal can
also be initiated with an external switch or logic signal.
The parts are highly reliable with accurate voltage references
and immunity to fast, negative-going transients on VCC. Low
current consumption and space-efficient, 4-lead SC70 packaging
make the ADM6711/ADM6713 ideal for use in low power
portable applications.
With six different reset threshold options available ranging from
2.32 V to 4.63 V, the ADM6711/ADM6713 are suitable for
monitoring 2.5 V, 3 V, 3.3 V, and 5 V supplies. A reset timeout
of at least 140 ms occurs when VCC rises above the threshold.
This gives the supply voltage time to stabilize before the
microprocessor starts up.
V
V
CC
*R
PULL-UP
CC
MICROPROCESSOR
SYSTEM
ADM6711/
ADM6713
MR
RESET
RESET
GND
GND
The ADM6711 has a push-pull output, so no additional external
components are needed. The ADM6713 open-drain output
requires an external pull-up resistor that can be connected to
a voltage higher than VCC, if desired.
*ADM6713 ONLY
Figure 3. Typical Operating Circuit
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2006–2011 Analog Devices, Inc. All rights reserved.