Digital MEMS Vibration Sensor
w/ Embedded RF Transceiver
Preliminary Technical Data
ADIS16000/ADIS16229
FEATURES
GENERAL DESCRIPTION
Wireless vibration system, 862MHz – 928MHz
Clear Channel Assessment/Packet collision avoidance
Error Detection and Correction in RF protocol
Programmable RF Output power
Gateway node (ADIS16000)
SPI to RF function
The ADIS16000 and ADIS16229 enable creation of a simple
wireless vibration-sensing network for a wide variety of
industrial-equipment applications. . The ADIS16000 provides
the gateway function, which manages the network, while the
ADIS16229 provides the remote sensing function.
The ADIS16229 iSesnor is a complete wireless vibration sensor
node that combines dual-axis acceleration sensing with advanced
time domain and frequency domain signal processing. Time
domain signal processing includes a programmable decimation
filter and selectable windowing function. Frequency domain
processing includes a 512-point, real-valued FFT, FFT
magnitude averaging, and programmable spectral alarms. The
FFT record storage system offers users the ability to track
changes over time and capture FFTs with multiple decimation
filter settings.
Manage up to 6 sensor nodes
Sensor Node (ADIS16229)
Dual-axis, 18g MEMS accelerometer
5.5kHz Resonant frequency
Digital range settings: 0 g to 1 g/5 g/10 g/20 g
Sample rate up to 20kSPS
Programmable wake-up capture, update cycle times
FFT, 512-point, real valued
Rectangular, Hanning, flat top window options
Programmable decimation filter, 11 rate settings
Multi-record capture for selected filter settings
Manual capture mode for time domain data collection
Programmable FFT averaging: up to 255 averages
Record Storage: 14 FFT records on all three axes (x, y)
Programmable alarms, 6 spectral bands, 2 levels
Adjustable response delay to reduce false alarms
Internal self-test with status flags
Digital temperature and power supply measurements
Identification registers: serial number, device ID, user ID
47mm x 38mm PCB package with SMA antenna interface
Single-supply operation: 3.0 V to 3.6 V
Operating temperature range: −40°C to +85°C
The ADIS16229’s dynamic range, bandwidth, sample rate and
noise performance are well suited for a wide variety of machine
health and production equipment monitoring systems. This
devices also provides a number of wireless configuration
parameters enable a wide level of flexibility in managing the
trade-off between battery life and communication frequency.
The ADIS16000 SPI interface provides simple connectivity with
most embedded processor platforms and the SMA connector
interface enables the use of many different antennas. This
module supports up to six ADIS16229 devices at one time,
using a proprietary wireless protocol.
Both ADIS16000 and ADIS16229 modules are in in
APPLICATIONS
47.0x37.6x22.6mm PCB structures, have an SMA connector for
simple antenna connection, have two mounting holes for simple
installation and support operation over a temperature range of -
40°C to +85°C. The ADIS16000 also includes a standard 1mm,
14-pin connector for connecting to an embedded processor
system. The ADIS16229 provides a lead structure that enables
simple connection with standard batteries.
Vibration analysis
Condition monitoring
Machine health
Instrumentation, diagnostics
Safety shutoff sensing
FUNCTIONAL BLOCK DIAGRAM
Figure 1.
Rev. PrA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2013 Analog Devices, Inc. All rights reserved.