CMOS Latched
8-/16-Channel Analog Multiplexers
a
ADG526A/ADG527A
FUNCTIONAL BLOCK DIAGRAM
FEATURES
44 V Supply Maximum Rating
VSS to VDD Analog Signal Range
ADG526A
ADG527A
Single/Dual Supply Specifications
Wide Supply Ranges (10.8 V to 16.5 V)
Microprocessor Compatible (100 ns WR Pulse)
Extended Plastic Temperature Range (–40؇C to +85؇C)
Low Leakage (20 pA Typ)
S1A
S8A
S1
DA
DB
D
Low Power Dissipation (28 mW Max)
Available in DIP, SOIC, PLCC, and LCCC Packages
Superior Alternative to: DG526, DG527
S1B
S8B
S16
DECODER/
LATCHES
DECODER/
LATCHES
WR
WR
A0 A1 A2 A3 EN
A0 A1 A2 EN
RS
RS
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The ADG526A and ADG527A are CMOS monolithic analog
multiplexers with 16 channels and dual 8 channels respectively.
On-chip latches facilitate microprocessor interfacing. The
ADG526A switches one of 16 inputs to a common output
depending on the state of four binary addresses and an enable
input. The ADG527A switches one of eight differential inputs
to a common differential output depending on the state of three
binary addresses and an enable input. Both devices have TTL
and 5 V CMOS logic compatible digital inputs.
1. Single/Dual Supply Specifications with a Wide Tolerance:
The devices are specified in the 10.8 V to 16.5 V range for
both single and dual supplies.
2. Easily Interfaced: The ADG526A and ADG527A can be
easily interfaced with microprocessors. The WR signal latches
the state of the Address control lines and the Enable line.
The RS signal clears both the address and enable data in the
latches resulting in no output (all switches off). RS can be
tied to the microprocessor reset pin.
The ADG526A and ADG527A are designed on an enhanced
LC2MOS process which gives an increased signal capability of
VSS to VDD and enables operation over a wide range of supply
voltages. The devices can comfortably operate anywhere in the
10.8 V to 16.5 V single or dual supply range. These multiplex-
3. Extended Signal Range: The enhanced LC2MOS processing
results in a high breakdown and an increased analog signal
range of VSS to VDD
.
4. Break-Before-Make Switching: Switches are guaranteed
break-before-make so that input signals are protected against
momentary shorting.
ers also feature high switching speeds and low RON
.
5. Low Leakage: Leakage currents in the range of 20 pA make
these multiplexers suitable for high precision circuits.
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2002