CMOS Latched
8-/16-Channel Analog Multiplexers
ADG526A/ADG527A
FUNCTIONAL BLOCK DIAGRAMS
FEATURES
44 V supply maximum rating
ADG526A
VSS to VDD analog signal range
S1
Single- or dual-supply specifications
Wide supply ranges (10.8 V to 16.5 V)
D
WR
Microprocessor compatible (100 ns
pulse)
S16
Extended plastic temperature range (−40°C to +85°C)
Low leakage (20 pA typical)
Low power dissipation (28 mW maximum)
Available in PDIP, CERDIP, SOIC, and PLCC packages
Superior alternative to DG526 and DG527
DECODER/
LATCHES
WR
A0 A1 A2 A3 EN RS
Figure 1. ADG526A
APPLICATIONS
ADG527A
Data acquisition systems
Communication systems
S1A
DA
Automatic test equipment
Microprocessor controlled systems
S8A
S1B
DB
S8B
GENERAL DESCRIPTION
DECODER/
WR
The ADG526A and ADG527A are CMOS monolithic analog
multiplexers with 16 single channels and dual 8 channels,
respectively. On-chip latches facilitate microprocessor interfacing.
LATCHES
A0 A1 A2 EN RS
Figure 2. ADG527A
The ADG526A switches one of 16 inputs to a common output,
depending on the state of four binary addresses and an enable
input. The ADG527A switches one of eight differential inputs to
a common differential output, depending on the state of three
binary addresses and an enable input. Both devices have TTL
and 5 V CMOS logic-compatible digital inputs.
PRODUCT HIGHLIGHTS
1.
Single- or Dual-Supply Specifications with a Wide
Tolerance. The devices are specified in the 10.8 V to
16.5 V range for both single and dual supplies.
2.
Easily Interfaced. The ADG526A and ADG527A can be
The ADG526A and ADG527A are designed on an enhanced
LC2MOS process that gives an increased signal capability of VSS
to VDD and enables operation over a wide range of supply
voltages. The devices can comfortably operate anywhere in the
10.8 V to 16.5 V single- or dual-supply range. These multiplexers
WR
easily interfaced with microprocessors. The
latches the state of the address control lines and the enable
RS
signal
line. The
signal clears both the address and enable data
RS
in the latches, resulting in no output (all switches off).
can be tied to the microprocessor reset pin.
also feature high switching speeds and low RON
.
3.
4.
5.
Extended Signal Range. The enhanced LC2MOS
processing results in a high breakdown and an increased
analog signal range from VSS to VDD
.
Break-Before-Make Switching. Switches are guaranteed
break-before-make so that input signals are protected
against momentary shorting.
Low Leakage. Leakage currents in the range of 20 pA
make these multiplexers suitable for high precision circuits.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2008 Analog Devices, Inc. All rights reserved.