ADC3683
ADC3683
www.ti.com
SBAS872 – DECEMBER 2020
SBAS872 – DECEMBER 2020
ADC368x 18-bit 0.5 to 65-MSPS Low Noise Ultra-low Power Dual Channel ADC
1 Features
3 Description
•
•
•
•
Dual Channel ADC
18-bit 10/25/65 MSPS ADC
Noise Floor: -160 dBFS/Hz
Low Power and Optimized Power Scaling:
50 mW/ch (10 MSPS) to 94 mW/ch (65 MSPS)
Latency: 1-2 clock cycles
18-bit, no missing codes
INL/DNL: ±7/ ±0.7 LSB (typ)
Reference: External or Internal
Input Bandwidth: 900MHz (3-dB)
Industrial Temperature Range: -40 to +105°C
On-chip digital filter (Optional)
– Decimation by 2, 4, 8, 16, 32
– 32-bit NCO
Serial LVDS digital interface (2-, 1- and 1/2-wire)
Small Footprint: 40-QFN (5x5 mm) Package
Spectral Performance (fIN = 5 MHz):
– SNR: 83.8 dBFS
– SFDR: 89 dBc HD2, HD3
– SFDR: 101 dBFS Worst Spur
Spectral Performance (fIN = 20MHz):
– SNR: 82.6 dBFS
– SFDR: 85 dBc HD2, HD3
– SFDR: 97 dBFS Worst Spur
The ADC3681, 82, 83 (ADC368x) is a low noise, ultra-
low power 18-bit 65 MSPS high-speed dual channel
ADC family. Designed for lowest noise performance, it
delivers a noise spectral density of -160 dBFS/Hz
combined with excellent linearity and dynamic range.
The ADC368x offers excellent DC precision together
with IF sampling support which makes it ideally suited
for a wide range of applications. High-speed control
loops benefit from the short latency as low as only 1
clock cycle. The ADC consumes only 94 mW/ch at 65
Msps and its power consumption scales very well with
lower sampling rates.
•
•
•
•
•
•
•
The ADC368x uses a serial LVDS (SLVDS) interface
to output the data which minimizes the number of
digital interconnects. The device supports two-lane,
one-lane and half-lane options. The ADC36xx is a pin
to pin compatible family of ADCs with 16 and 18-bit
resolution and different speed grades. It comes in a
40-pin QFN package (5 x 5mm) and supports the
extended industrial temperature range from -40 to
+105⁰C.
•
•
•
Device Information
•
PART NUMBER
ADC368x
PACKAGE(1)
BODY SIZE (NOM)
VQFN (40)
5.00 x 5.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
2 Applications
Device Comparison
•
•
•
•
•
•
•
•
•
•
•
•
High-Speed Data Acquisition
Industrial Monitoring
Software Defined Radio
Power Quality Analyzer
Source Measurement Unit (SMU)
Communications Infrastructure
Spectrum Analyzer
Control Loops
Instrumentation
Imaging
Spectroscopy
Radar
PART NUMBER
ADC3683
RESOLUTION
SAMPLING RATE
18 BIT
65 MSPS
ADC3682(1)
18 BIT
18 BIT
25 MSPS
ADC3681(1)
10 MSPS
(1) Product Preview.
FFT: Fs = 65 MSPS, Fin = 5 MHz
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
Product Folder Links: ADC3683
1
DATA.