8-Channel Multicell Battery Monitor
ADBMS6817
Data Sheet
FEATURES
TYPICAL APPLICATION CIRCUIT
4 MODULES SHOWN
Measures up to 8 battery cells in series
Maximum lifetime total measurement error: 1.5 mV
Stackable architecture for high voltage battery packs
Built-in isoSPI interface
2 Mb isolated serial communications
Uses a single twisted pair, up to 20 meters
Low EMI susceptibility and emissions
Bidirectional for broken wire protection
Capacitor or transformer coupled
Hot plug tolerant without external protection
ADBMS6817WFS models are developed for use in ISO 26262
applications for Automotive Safety Integrity Level
Capability D (ASIL D)
MODULE 2
MODULE N – 1
+
isoSPI
PORT B
isoSPI
Port A
UP TO
8
–t°
CELLS
ADBMS6817
ADBMS6817
UP TO
8
CELLS
–t°
isoSPI
Port A
isoSPI
Port B
+
MODULE 1
MODULE N
+
isoSPI
PORT B
isoSPI
Port A
UP TO
8
CELLS
UP TO
8
CELLS
–t°
ADBMS6817
ADBMS6817
–t°
isoSPI
PORT A
isoSPI
Port B
+
Diagnostics for IC and application circuit failure modes
304 µs to measure all cells in a system
16-bit ADC with programmable noise filter
Passive cell balancing up to 300 mA per channel with
programmable PWM
7 GPIO or analog inputs
Temperature or other sensor inputs
Configurable as an I2C or SPI master
OPTIONAL
REVERSIBLE
isoSPI
isoSPI
PORT
LOOP
LTC2949
BATTERY
PACK
MONITOR
isoSPI
isoSPI
LTC6820 LTC6820
SPI
4
SPI
4
Sleep state supply current: 5.5 μA
48-lead LQFP package with exposed pad
AEC-Q100 qualified for automotive applications
HV–
HV+
BMS CONTROLLER
(SAFETY MICROCONTROLLER)
APPLICATIONS
Figure 1.
Electric and hybrid electric vehicles
Backup battery systems
Grid energy storage
Large portable power banks
processor connection for all devices. This daisy chain can be
operated bidirectionally, ensuring communication integrity
even in the event of a fault along the communication path.
GENERAL DESCRIPTION
The ADBMS6817 is a multicell battery stack monitor that
measures up to 8 series connected battery cells with a lifetime
total measurement error (TME) of less than 1.5 m V. The cell
measurement range of 0 V to 5 V makes the ADBMS6817
suitable for most battery chemistries. All 8 cells can be measured
in 304 µs, and lower data acquisition rates can be selected for
high noise reduction.
The ADBMS6817 can be powered directly from the battery
stack or from an isolated supply. The ADBMS6817 includes
passive balancing for each cell, with individual pulse-width
modulation (PWM) duty cycle control for each cell. Other
features include an on-board 5 V regulator, seven general-
purpose input/output (GPIO) lines, and a sleep state, where
current consumption is reduced to 5.5 µA.
Multiple ADBMS6817 devices can be connected in series,
permitting simultaneous cell monitoring of long, high voltage
battery strings. Each ADBMS6817 has an isoSPI™ interface for
high speed, RF immune, long distance communications.
Multiple devices are connected in a daisy chain with one host
The ADBMS6817WFS models are developed for use in
ISO 26262 applications for Automotive Safety Integrity Level
Capability D (ASIL D).
For more information on the ADBMS6817, visit the ADBMS6817 product page
Rev. SpC
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2021 Analog Devices, Inc. All rights reserved.
www.analog.com
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
