4-slot Distributed DA&C System for
RS-485
8-slot Distributed DA&C System for
RS-485
ADAM-5000/485
ADAM-5000E
Features
RS-485 communication for easy installation and networking
4 or 8 slots for up to 128 points data monitoring card control in one module
Extensive software support, includes windows DLL drivers, OCX drivers, OPC
server and popular HMI/SCADA software drivers
Seamlessly integrated with easy-to-use ADAMView data acquisition software
Supports ADAM ASCII protocol or Modbus®/RTU protocol
Supports Modbus/RTU protocol with user-defined Modbus address
RoHS
COMPLIANT
2002/95/EC
Introduction
The ADAM-5000/485 and ADAM-5000E systems conform to the EIA RS-485 communication standard. This is the industry's most widely used, balanced, bidirectional transmission
line standard. RS-485 was specifically developed for industrial applications to transmit and receive data at high rates over long distances.
Specifications
Control System
Protection
CPU
I/O Slots
16-bit 80188 microprocessor
ADAM-5000/485: 4
ADAM-5000E: 8
Power, CPU, communications
1.6 sec. (System)
Communication Line
Isolation
I/O Module Isolation
Transient Protection
Power Reversal
2,500 VDC (ADAM-5000/485)
3,000 VDC (ADAM-5000E)
3,000 VDC
RS-485 communication lines, power input
Yes
LED Indicators
Watchdog Timer
Protection
Communications
Command Format
Communication
Distance
General
Certification
Connectors
ASCII command/response protocol, Modbus/RTU
RS-485: 1.2 km (4000 feet)
CE, FM
1 x DB9-M/DB9-F/screw terminal for RS-485
(communication)
1 x DB9-F for RS-232 (configuration)
1 x Screw-terminal for power input
Data Format
Asynchronous. 1 start bit, 8 data bits, 1 stop bit, no
parity
Programming link: RS-232 (3-wire: TX, RX, GND)
Communication: RS-485 (2-wire)
Communication error checking with checksum
128 (in RS-485 daisy-chain network)
1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, and 115.2
Network Protocols
Dimensions (WxHxD) 4-slot: 231 x 110 x 75 mm
8-slot: 355 x 110 x 75 mm
ABS+PC
DIN-rail, wall, rack (with mounting kit)
Reliability Check
Max. Nodes
Speeds (kbps)
Enclosure
Mounting
Environment
Power
Humidity
5 ~ 95%, non-condensing
Power Consumption
3 W @ 24 VDC (ADAM-5000/485)
(not including I/O modules)
4.0 W @ 24 VDC (ADAM-5000E)
(not including I/O modules)
Operating Temperature -10 ~ 70°C (14 ~ 158°F)
Storing Temperature -25 ~ 85°C (-13 ~ 185°F)
Power Input
Unregulated 10 ~ 30 VDC
Ordering Information
Software
ADAM-5000/485
ADAM-5000E
4-slot Distributed DA & C System for RS-485
8-slot Distributed DA & C System for RS-485
Driver Support Windows DLL, OPC Server, Wonderware InTouch,
Intellution, iFIX, Citect, Advantech Studio, ADAMView
C and .NET Class Library
DIN-Rail IPCs
All product specifications are subject to change without notice
Last updated : 5-May-2015