ADAM-5000/485
ADAM-5000E
Distributed DA&C System
Based on RS-485
Features
. RS-485 Communication for easy installation and networking
. 4 or 8 slots for up to 128 points data monitoning card control in one
module
. Extensive Software support, inclucles windows DLL drivers, OCX drivers,
OPC server and popular HMI/SCAPA Software driver.
. Seamlessly inteqrated with easy-to-use ADAMView data acquisition
Software.
Introduction
The ADAM-5000/485 and ADAM-5000E systems use the EIA RS-485 communication protocol. This is the industry's most widely used, balanced, bidirectional transmission line
standard. The RS-485 was specifically developed for industrial applications to transmit and receive data at high rates over long distances.
Processor
Power Requirements
. CPU
16-bit microprocessor
. Unregulated +10 to +30 VDC
. I/O module capacity
. Watchdog Timer
. Power Consumption
4 or 8
Yes
. Protected against Power Reversal
. Power Protection
Transient suppression on power input
1.0 W (ADAM-5000/485)
4.0 W (ADAM-5000E)
Mechanical
. Case
. Plug-in Screw
Terminal Block
KJW with captive mounting hardware
Accepts 0.5 mm2 to 2.5 mm2 , 1 - #12 or 2 - #14 to
#22 AWG
Isolation
. Communication
Isolation
2500 VDC (ADAM-5000/485)
3000 VDC (ADAM-5000E)
Environment
. Operating Temperature -10 ~ 70° C (14 ~ 158° F)
. Storage Temperature -25 ~ 85° C (-13 ~ 185° F)
. Communication Power 3000 VDC
Isolation
. I/O Module Isolation
3000 VDC
. Humidity
5 ~ 95%, non-condensing
Diagnosis
. Status Display
. Self-test
. Software Diagnosis
Power, CPU, communication
Yes, while on
Yes
Ordering Information
. ADAM-5000/485
. ADAM-5000E
Distributed DA&C System Based on RS-485 (4 slot)
Communication
. Network
. Speeds (bps)
Distributed DA&C System Based on RS-485 (8 slot)
OPC Server for ADAM-4000/5000 Series (RS-485)
ActiveX Control for Data Acquisition and Control
ADAMView Data Acquisition Software
RS-232 or RS-485 (2-wire) to host
1200, 2400, 4800, 9600, 19.2 k, 38.4 k, 57.6 k, and
115.2 kbps
. PCLS-OPC/ADM
. PCLS-OCX
. PCLS-ADAMVIEW32
. Max. Communication 4000 feet (1.2 km)
Distance
. Command Format
. Reliability Check
. Asynchronous
ASCII command/response protocol
Communication error checking with checksum
1 start bit, 8 data bits, 1 stop bit, no parity
Data Format
. Maximum Nodes
. Protection
Up to 256 multi-drop systems per host serial port
Transient suppression on
RS-485 communication lines
Distributed DA&C Systems