High Speed Difference Amplifier with Input
Short-to-Battery Protection
Data Sheet
ADA4830-1/ADA4830-2
FEATURES
FUNCTIONAL BLOCK DIAGRAM
ENA
+VS
STB
Input overvoltage (short-to-battery) protection of up to 18 V
Short-to-battery output flag for wire diagnostics
Wide input common-mode range with single 5 V supply
High performance video amplifier with 0.50 V/V gain
−3 dB bandwidth of 84 MHz
+VS
ADA4830-1
R/2
VREF
×1
250 V/µs slew rate (2 V step)
Excellent video specifications
0.1 dB flatness to 28 MHz
SNR of 73 dB to 15 MHz
R
R
INP
INN
VOUT
R/2
Differential gain/phase of 0.1%/0.1°
Wide supply range: 2.9 V to 5.5 V
Enable/output disable mode
Space saving 3 mm × 3 mm LFCSP package
Wide operating temperature range: −40°C to +125°C
Qualified for automotive applications
GND
Figure 1.
ENA1
×1
+VS1
STB1
+VS
ADA4830-2
R/2
VREF1
INP1
APPLICATIONS
Automotive vision systems
Automotive infotainment
Surveillance systems
R
R
VOUT1
GND2
INN1
R/2
R/2
GENERAL DESCRIPTION
GND1
The ADA4830-1 (single) and ADA4830-2 (dual) are monolithic,
high speed difference amplifiers that integrate input overvoltage
(short-to-battery) protection of up to 18 V with a wide input
common-mode voltage range and excellent ESD robustness.
They are intended for use as receivers for differential or pseudo
differential CVBS and other high speed video signals in harsh,
noisy environments such as automotive infotainment and vision
systems. The ADA4830-1 and ADA4830-2 combine high speed
and precision, which allows for accurate reproduction of CVBS
video signals, yet rejects unwanted common-mode error voltages.
R
R
INN2
INP2
VOUT2
+VS
VREF2
×1
R/2
ENA2
+VS2
STB2
Figure 2.
below ground rail and to 8.5 V above ground on a single 5 V
supply. At the output, the amplifier can swing to within 250 mV
of either supply rail into a 150 Ω load.
The short-to-battery protection that is integrated into the
ADA4830-1 and ADA4830-2 employs fast switching circuitry to
clamp and hold internal voltage nodes at a safe level when an input
overvoltage condition is detected. This protection allows the inputs
of the ADA4830-1 and ADA4830-2 to be directly connected to a
remote video source, such as a rearview camera, without the
need for large expensive series capacitors. The ADA4830-1 and
ADA4830-2 can withstand direct short-to-battery voltages as
high as 18 V on their input pins.
The ADA4830-1 and ADA4830-2 present a gain of 0.50 V/V at their
output. This is designed to keep the video signal within the allowed
range of the video decoder, which is typically 1 V p-p or less.
The ADA4830-1W and ADA4830-2W are automotive grade
version, qualified for automotive applications. See the
Automotive Products section for more details.
The ADA4830-1 and ADA4830-2 are designed to operate at supply
voltages as low as 2.9 V and as high as 5.5 V, using only 6.8 mA
of supply current per channel. These devices provide true single-
supply capability, allowing the input signal to extend 8.5 V
The ADA4830-1 and ADA4830-2 are available in 3 mm × 3 mm
LFCSP packages, 8-lead and 16-lead, respectively, and are specified
for operation over the automotive temperature range of −40°C
to +125°C.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2011–2012 Analog Devices, Inc. All rights reserved.
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
