Datasheet > ADA4500-2ACPZ-R7

ADA4500-2ACPZ-R7

更新时间： 2024-01-30 00:47:31

品牌	Logo	应用领域
亚德诺 - ADI		放大器
页数	文件大小	规格书
25页	1122K
描述
10 MHz, 14.5 nV/âHz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

ADA4500-2ACPZ-R7 技术参数

是否无铅：	含铅	是否Rohs认证：	符合
生命周期：	Active	包装说明：	HVSON, SOLCC8,.12,20
针数：	8	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8542.31.00.01
风险等级：	1.71	Samacsys Description：	Dual Low Noise R-R I/O CMOS OpAmp LFCSP8
放大器类型：	OPERATIONAL AMPLIFIER	架构：	VOLTAGE-FEEDBACK
最大平均偏置电流 (IIB)：	0.00019 µA	25C 时的最大偏置电流 (IIB)：	0.000002 µA
标称共模抑制比：	115 dB	频率补偿：	YES
最大输入失调电压：	700 µV	JESD-30 代码：	S-PDSO-N8
JESD-609代码：	e3	长度：	3 mm
低-偏置：	YES	低-失调：	YES
微功率：	NO	湿度敏感等级：	3
功能数量：	2	端子数量：	8
最高工作温度：	125 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	HVSON
封装等效代码：	SOLCC8,.12,20	封装形状：	SQUARE
封装形式：	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	包装方法：	TAPE AND REEL
峰值回流温度（摄氏度）：	260	功率：	NO
电源：	+-1.35/+-2.75/2.7/5.5 V	可编程功率：	NO
认证状态：	Not Qualified	座面最大高度：	0.85 mm
标称压摆率：	5.5 V/us	子类别：	Operational Amplifier
最大压摆率：	1.7 mA	供电电压上限：	6 V
标称供电电压 (Vsup)：	5 V	表面贴装：	YES
技术：	DMOS	温度等级：	AUTOMOTIVE
端子面层：	Matte Tin (Sn)	端子形式：	NO LEAD
端子节距：	0.5 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	30	标称均一增益带宽：	10000 kHz
最小电压增益：	10000	宽带：	NO
宽度：	3 mm	Base Number Matches：	1

ADA4500-2ACPZ-R7 数据手册

10 MHz, 14.5 nV/√Hz, Rail-to-Rail I/O,

Zero Input Crossover Distortion Amplifier

Data Sheet

ADA4500-2

FEATURES

PIN CONFIGURATION

Power supply rejection ratio (PSRR): 98 dB minimum

Common-mode rejection ratio (CMRR): 95 dB minimum

Offset voltage: 120 µV maximum

Single-supply operation: 2.7 V to 5.5 V

Dual-supply operation: 1.35 V to 2.75 V

Wide bandwidth: 10 MHz

OUT A

–IN A

+IN A

V–

V+

OUT B

–IN B

+IN B

ADA4500-2

TOP VIEW

(Not to Scale)

Figure 1. 8-Lead MSOP Pin Configuration

Rail-to-rail input and output

Low noise

2 µV p-p from 0.1 Hz to 10 Hz

14.5 nV/√Hz at 1 kHz

For more information on the pin connections, see the Pin

Configurations and Function Descriptions section

100

ADA4500-2

= 5.0V

Very low input bias current: 2 pA maximum

APPLICATIONS

Pressure and position sensors

Remote security

Medical monitors

Process controls

Hazard detectors

Photodiode applications

–20

–40

–60

–80

–100

(V)

Figure 2. The ADA4500-2 Eliminates Crossover Distortion

Across its Full Supply Range

GENERAL DESCRIPTION

The ADA4500-2 is a dual 10 MHz, 14.5 nV/√Hz, low power

amplifier featuring rail-to-rail input and output swings while

operating from a 2.7 V to 5.5 V single power supply. Compatible

with industry-standard nominal voltages of +3.0 V, +3.3 V,

+5.0 V, and 2.5 V.

This combination of features makes the ADA4500-2 an ideal choice

for precision sensor applications because it minimizes errors due to

power supply variation and maintains high CMRR over the full

input voltage range. The ADA4500-2 is also an excellent amplifier

for driving analog-to-digital converters (ADCs) because the output

does not distort with the common-mode voltage, which enables

the ADC to use its full input voltage range, maximizing the

dynamic range of the conversion subsystem.

Employing a novel zero-crossover distortion circuit topology, this

amplifier offers high linearity over the full, rail-to-rail input

common-mode range, with excellent power supply rejection ratio

(PSRR) and common-mode rejection ratio (CMRR) performance

without the crossover distortion seen with the traditional

complementary rail-to-rail input stage. The resulting op amp

also has excellent precision, wide bandwidth, and very low

bias current.

Many applications such as sensors, handheld instrumentation,

precision signal conditioning, and patient monitors can benefit

from the features of the ADA4500-2.

The ADA4500-2 is specified for the extended industrial temperature

range (−40°C to +125°C) and available in the standard 8-lead

MSOP and 8-lead LFCSP packages.

Rev. A

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rightsof third parties that may result fromits use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks andregisteredtrademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

Technical Support

www.analog.com

12 3 4 5 6 7...25

中文翻译

下载PDF

ADA4500-2ACPZ-R7 替代型号

型号	品牌	替代类型	描述	数据表
ADA4500-2ARMZ-R7	ADI	完全替代	10 MHz, 14.5 nV/âHz, Rail-to-Rail I/O, Zero
ADA4500-2ACPZ-RL	ADI	类似代替	10 MHz, 14.5 nV/âHz, Rail-to-Rail I/O, Zero
MCP6022-I/SN	MICROCHIP	功能相似	Rail-to-Rail Input/Output, 10 MHz Op Amps

与ADA4500-2ACPZ-R7相关器件

型号	品牌	获取价格	描述	数据表
ADA4500-2ACPZ-RL	ADI	获取价格	10 MHz, 14.5 nV/âHz, Rail-to-Rail I/O, Zero
ADA4500-2ARMZ	ADI	获取价格	10 MHz, 14.5 nV/âHz, Rail-to-Rail I/O, Zero
ADA4500-2ARMZ-R7	ADI	获取价格	10 MHz, 14.5 nV/âHz, Rail-to-Rail I/O, Zero
ADA4500-2ARMZ-RL	ADI	获取价格	10 MHz, 14.5 nV/âHz, Rail-to-Rail I/O, Zero
ADA4505-1	ADI	获取价格	22 μA, RRIO, CMOS, 18 V
ADA4505-12	ADI	获取价格	Operational Amplifiers Selection Guide
ADA4505-1ACBZ-R7	ADI	获取价格	10 UA, Rail-to-Rail I/O, Zero InputCrossover Distortion Amplifiers
ADA4505-1ACBZ-RL	ADI	获取价格	10 UA, Rail-to-Rail I/O, Zero InputCrossover Distortion Amplifiers
ADA4505-1ARJZ	UMW	获取价格	低噪声运算放大器
ADA4505-1ARJZ-R2	ADI	获取价格	10 UA, Rail-to-Rail I/O, Zero InputCrossover Distortion Amplifiers

与ADA4500-2ACPZ-R7相关文章

BSS138LT3G：一款高效能N沟道MOSFET的全面解析
2024-07-04

11
解读EGP10B二极管资料手册：产品特性、参数分析
2024-07-04

10
RT9164AGG手册资料详解：引脚信息、设计指南
2024-07-04

12
2SA1037KPT资料详解：产品特性、电气参数、设计指南
2024-07-04

15

产品中心

服务支持

精选活动

关于我们

帮助中心

ADA4500-2ACPZ-R7

ADA4500-2ACPZ-R7 技术参数

ADA4500-2ACPZ-R7 数据手册

ADA4500-2ACPZ-R7 替代型号

与ADA4500-2ACPZ-R7相关器件

与ADA4500-2ACPZ-R7相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ADA4500-2ACPZ-R7

ADA4500-2ACPZ-R7 技术参数

ADA4500-2ACPZ-R7 数据手册

ADA4500-2ACPZ-R7 替代型号

与ADA4500-2ACPZ-R7相关器件

与ADA4500-2ACPZ-R7相关文章

您还可以找

您在本页遇到什么问题？