10 μA, Rail-to-Rail I/O, Zero Input
Crossover Distortion Amplifier
ADA4505-2
PIN CONFIGURATION
FEATURES
OUT A
–IN A
+IN A
V–
1
2
3
4
8
7
6
5
V+
PSRR: 100 dB minimum
CMRR: 105 dB typical
Very low supply current: 10 μA per amplifier maximum
1.8 V to 5 V single-supply or 0.9 to 2.5V dual-supply
operation
ADA4505-2
TOP VIEW
(Not to Scale)
OUT B
–IN B
+IN B
Figure 1. 8-Lead MSOP (RM-8)
Rail-to-rail input and output
2.5 mV offset voltage maximum
Very low input bias current: 0.5 pA typical
APPLICATIONS
Pressure and position sensors
Remote security
Medical monitors
Battery-powered consumer equipment
Hazard detectors
GENERAL DESCRIPTION
The ADA4505-2 is a dual micropower amplifier featuring rail-
to-rail input and output swings while operating from a 1.8 V to
5 V single or from 0.ꢀ V to 2.5 V dual power supply.
Remote battery-powered sensors, handheld instrumentation
and consumer equipment, hazard detectors (for example, smoke,
fire, and gas), and patient monitors can benefit from the
features of the ADA4505-2 amplifier.
Employing a new circuit technology, this low cost amplifier
offers zero input crossover distortion (excellent PSRR and
CMRR performance) and very low bias current, while operating
with a supply current of less than 10 μA per amplifier.
The ADA4505-2 is specified for both the industrial temperature
range (−40°C to +85°C) and the extended industrial temperature
range (−40°C to +125°C). The ADA4505-2 dual amplifiers are
available in the standard 8-lead MSOP package.
This combination of features makes the ADA4505-2 amplifier
an ideal choice for battery-powered applications because it
minimizes errors due to power supply voltage variations over
the lifetime of the battery, and maintains high CMRR even for a
rail-to-rail op amp.
The ADA4505-2 is a member of a growing series of zero crossover
op amps offered by Analog Devices, Inc., including the AD8506,
which also operates from a 1.8 V to 5 V single or from 0.ꢀ V to
2.5 V dual power supply.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2008 Analog Devices, Inc. All rights reserved.