High Power, Low Distortion Upstream
CATV Line Driver
ADA4320-1
FUNCTIONAL BLOCK DIAGRAM
FEATURES
Supports CableLabs® DOCSIS 3.0/2.0 and EuroDOCSIS
3.0/2.0 specifications for customer premises equipment
(CPE) upstream transmission
VIN–
VIN+
VOUT+
VOUT–
DIFF OR
SINGLE
INPUT
AMP
ATTENUATION
CORE
POWER
AMP
VERNIER
5 V single-supply operation
Z
300Ω
DIFF =
Excellent adjacent channel rejection performance
−66 dBc ACPR for a single QPSK channel
−63 dBc ACPR for 4× QAM64 channels
Gain programmable in 1 dB steps over a 59 dB range
Gain range: −27 dB to +32 dB
OUT
8
Z
Z
(SINGLE) = 320Ω
(DIFF) = 640Ω
IN
IN
DECODE
8
POWER-DOWN
LOGIC
RAMP
DATA LATCH
8
ADA4320-1
SHIFT
REGISTER
Current-scaled output stage
GND
DATEN SDATA CLK
TXEN
SLEEP
Low between-burst output noise level
−70 dB mV in 160 kHz bandwidth
Figure 1.
Maintains constant output impedance in enable, disable,
and sleep conditions
Selectable low power modes
12 mA in Tx disable
12 μA in sleep mode (full power-down)
3-wire, SPI-compatible interface
4 mm × 5 mm 24-lead LFCSP, RoHS compliant
APPLICATIONS
DOCSIS 3.0 and EuroDOCSIS cable modems/E-MTAs
DOCSIS 3.0 set-top boxes
CATV telephony modems
Coaxial or twisted pair line drivers
GENERAL DESCRIPTION
The ADA4320-1 is a high power, ultralow distortion amplifier
designed for CATV reverse channel line driving. Its features and
specifications make the ADA4320-1 ideally suited for DOCSIS 3.0-
and EuroDOCSIS 3.0-based applications. Both gain and output
stage current are controlled via a 3-wire (SPI-compatible) interface.
A single 8-bit serial word selects one of four available supply
current presets and one of sixty gain codes.
The ADA4320-1 features an output driver stage that scales
quiescent current consumption according to gain setting. In
multichannel mode at maximum gain (32 dB), the device draws
260 mA from a single 5 V supply, enabling the high power,
ultralow distortion performance required by multiple DOCSIS 3.0
upstream channels. For lifeline E-MTA applications, the ADA4320-1
output stage current can be throttled via SPI commands, reducing
the power requirement for single-channel transmission by up to
30%. In transmit-disable mode, the ADA4320-1 draws only 12 mA.
The device also features a full power-down sleep mode that
further reduces current draw to12 μA typical.
The ADA4320-1 has been tailored to address both the high output
drive and stringent fidelity requirements of DOCSIS 3.0. The
part is able to maintain excellent adjacent channel rejection
performance over the full 5 MHz to 85 MHz range, even with
multiple bonded channels at maximum specified output levels.
The ADA4320-1 is packaged in a RoHS-compliant, 24-lead
exposed pad LFCSP and is rated for operation over the −40°C
to +85°C temperature range.
The ADA4320-1 accepts a differential or single-ended input
signal. The output is specified for driving a single-ended 75 Ω
load through a 4:1 impedance transformer.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
© 2010 Analog Devices, Inc. All rights reserved.
5秒后页面跳转
PCF8574资料解读：主要参数分析、引脚说明
AD637数据手册解读：主要特性、引脚及其功能解读、电气参数
ADUM1201资料手册解读：参数分析、引脚说明、应用分析
一文带你了解压敏电阻器在直流电路中的过压保护作用
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
