+5 Volt, Parallel Input
a
Complete Dual 12-Bit DAC
AD8582
FEATURES
FUNCTIO NAL BLO CK D IAGRAM
Com plete Dual 12-Bit DAC
No External Com ponents
Single +5 Volt Operation
1 m V/ Bit w ith 4.095 V Full Scale
True Voltage Output, ±5 m A Drive
Very Low Pow er: 5 m W
AD8582
V
V
DD
12
12-BIT
DAC A
DAC A
LDA
OUTA
REGISTER
INPUT A
REGISTER
CS
A/B
APPLICATIONS
12
2
DATA
V
REFERENCE
REF
Digitally Controlled Calibration
Portable Equipm ent
Servo Controls
INPUT B
REGISTER
Process Control Equipm ent
PC Peripherals
12
DAC B
REGISTER
12-BIT
DAC B
LDB
V
OUTB
AGND
MSB
DGND
RST
GENERAL D ESCRIP TIO N
T he high speed parallel data interface connects to the fastest
processors without wait states. T he double-buffered input struc-
ture allows the user to load the input registers one at a time,
then a single load strobe tied to both LDA + LDB inputs will
update both DAC outputs simultaneously. LDA and LDB can
also be activated independently to immediately update their re-
spective DAC registers. An address input decodes DAC A or
DAC B when the chip select CS input is strobed. An asynchro-
nous reset input sets the output to zero scale. T he MSB bit can
be used to establish a preset to midscale when the reset input is
strobed.
T he AD8582 is a complete, parallel input, dual 12-bit, voltage
output DAC designed to operate from a single +5 volt supply.
Built using a CBCMOS process, this monolithic DAC offers the
user low cost, and ease-of-use in +5 volt only systems.
Included on the chip, in addition to the DACs, are a rail-to-rail
amplifier, latch and reference. T he reference (VREF) is trimmed
to 2.5 volts output, and the on-chip amplifier gains up the DAC
output to 4.095 volts full scale. T he user needs only supply a +5
volt supply.
T he AD8582 is coded natural binary. T he op amp output
swings from 0 volt to +4.095 volts for a one-millivolt-per-bit
resolution, and is capable of driving ±5 mA. Operation down to
4.3 V is possible with output load currents less than 1 mA.
T he AD8582 is available in the 24-pin plastic DIP and the sur-
face mount SOIC-24. Each part is fully specified for operation
over –40°C to +85°C, and the full +5 V ± 5% power supply
range.
5.0
2.0
∆∆VFS
DATA = FFF
≤ 1 LSB
H
V
T
= +5V
1.5
1.0
T
= +25°C
DD
A
4.8
4.6
4.4
4.2
4.0
= –55°C, +25°C, +85°C
A
0.5
PROPER OPERATION
WHEN V SUPPLY
VOLTAGE ABOVE
CURVE
0.0
DD
–0.5
–1.0
= +25°C & +85°C
= –55°C
–1.5
–2.0
0.01
0.1
1.0
10
100
0
1024
2048
3072
4096
OUTPUT LOAD CURRENT – mA
DIGITAL INPUT CODE – Decimal
Figure 1. Minim um Supply Voltage vs. Load
Figure 2. Linearity Error vs. Digital Code and Tem perature
REV. 0
Inform ation furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assum ed by Analog Devices for its
use, nor for any infringem ents of patents or other rights of third parties
which m ay result from its use. No license is granted by im plication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norw ood. MA 02062-9106, U.S.A.
Tel: 617/ 329-4700
Fax: 617/ 326-8703