Fiber Optic Receiver with Quantizer and
Clock Recovery and Data Retiming
a
AD807
FEATURES
Meets CCITT G.958 Requirements
for STM-1 Regenerator—Type A
Meets Bellcore TR-NWT-000253 Requirements for OC-3
Output Jitter: 2.0 Degrees RMS
155 Mbps Clock Recovery and Data Retiming
Accepts NRZ Data, No Preamble Required
Phase-Locked Loop Type Clock Recovery—
No Crystal Required
reliance on external components such as a crystal or a SAW
filter, to aid frequency acquisition.
The AD807 acquires frequency and phase lock on input data
using two control loops that work without requiring external
control. The frequency acquisition control loop initially acquires
the frequency of the input data, acquiring frequency lock on
random or scrambled data without the need for a preamble. At
frequency lock, the frequency error is zero and the frequency
detector has no further effect. The phase acquisition control
loop then works to ensure that the output phase tracks the input
phase. A patented phase detector has virtually eliminated pattern
jitter throughout the AD807.
Quantizer Sensitivity: 2 mV
Level Detect Range: 2.0 mV to 30 mV
Single Supply Operation: +5 V or –5.2 V
Low Power: 170 mW
The device VCO uses a ring oscillator architecture and patented
low noise design techniques. Jitter is 2.0 degrees rms. This low
jitter results from using a fully differential signal architecture,
Power Supply Rejection Ratio circuitry and a dielectrically
isolated process that provides immunity from extraneous signals
on the IC. The device can withstand hundreds of millivolts of
power supply noise without an effect on jitter performance.
10 KH ECL/PECL Compatible Output
Package: 16-Lead Narrow 150 mil SOIC
PRODUCT DESCRIPTION
The AD807 provides the receiver functions of data quantization,
signal level detect, clock recovery and data retiming for 155 Mbps
NRZ data. The device, together with a PIN diode/preamplifier
combination, can be used for a highly integrated, low cost, low
power SONET OC-3 or SDH STM-1 fiber optic receiver.
The user sets the jitter peaking and acquisition time of the PLL
by choosing a damping factor capacitor whose value determines
loop damping. CCITT G.958 Type A jitter transfer require-
ments can easily be met with a damping factor of 5 or greater.
The receiver front end signal level detect circuit indicates when
the input signal level has fallen below a user adjustable thresh-
old. The threshold is set with a single external resistor. The
signal level detect circuit 3 dB optical hysteresis prevents chatter
at the signal level detect output.
Device design guarantees that the clock output frequency will
drift by less than 20% in the absence of input data transitions.
Shorting the damping factor capacitor, CD, brings the clock
output frequency to the VCO center frequency.
The AD807 consumes 170 mW and operates from a single
power supply at either +5 V or –5.2 V.
The PLL has a factory-trimmed VCO center frequency and a
frequency acquisition control loop that combine to guarantee
frequency acquisition without false lock. This eliminates a
FUNCTIONAL BLOCK DIAGRAM
CF1 CF2
QUANTIZER
PIN
NIN
+
–
LOOP
FILTER
COMPENSATING
ZERO
⌽
⌺
DET
PHASE-LOCKED LOOP
VCO
SIGNAL
LEVEL
THRADJ
CLKOUTP
CLKOUTN
DETECTOR
F
DET
LEVEL
DETECT
DATAOUTP
DATAOUTN
RETIMING
DEVICE
COMPARATOR/
BUFFER
+
–
AD807
SDOUT
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
World Wide Web Site: http://www.analog.com
© Analog Devices, Inc., 2000
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
