16-Bit, +/-0.65 LSB INL, 500 kSPS PulSAR®
Differential ADC in MSOP/QFN
Preliminary Technical Data
AD7693
FEATURES
APPLICATION DIAGRAM
+2.5V TO +5V
+5V
16-bit resolution with no missing codes
Throughput: 500 kSPS
INL: +/-0.25 LSB typical, 0.65 LSB max ( 10 ppm of FSR)
Dynamic range: 96.5 dB typical @ 500 kSPS
SINAD: 96 dB typical @ 1 kHz, REF = 5V
THD: −120 dB typical @ 1 kHz. REF = 5V
True differential analog input range: VREF
0 V to VREF with VREF up to VDD on both inputs
No pipeline delay
VIO
SDI
+1.8V TO VDD
REF VDD
GND
IN+
IN–
3- OR 4-WIRE
SCK
SDO
CNV
INTERFACE
±10V, ±5V, ...
(SPI, DAISY CHAIN, CS)
ADA4941-1
AD7693
Figure 2.
Single-supply 5 V operation with
1.8 V/2.5 V/3 V/5 V logic interface
Serial interface SPI®/QSPI™/MICROWIRE™/DSP-compatible
Daisy-chain multiple ADCs and busy indicator
Power dissipation
4 mW @ 5 V/100 kSPS
40 μW @ 5 V/1 kSPS
Standby current: 1 nA
10-lead package: MSOP (MSOP-8 size) and
3 mm × 3 mm QFN1 (LFCSP) (SOT-23 size)
Table 1. MSOP, QFN1 (LFCSP)/SOT-23
14-/16-/18-Bit PulSAR ADC
400 kSPS
to
500 kSPS Driver
100
kSPS
250
kSPS
ADC
Type
18-Bit
AD7691
AD7690
ADA4941-1
ADA4841-x
ADA4941-1
ADA4841-x
16-Bit True
Differential
AD7684 AD7687
AD7688
AD7693
AD7686
16-Bit Pseudo AD7683 AD7685
ADA4841-x
Pin-for-pin compatible with the AD7687, AD7688 and 18-bit
AD7690 and AD7691
Differential/
Unipolar
AD7680 AD7694
14-Bit
AD7940 AD7942
AD7946
ADA4841-x
APPLICATIONS
1 QFN package in development. Contact sales for samples and availability.
Battery-powered equipment
Data acquisitions
GENERAL DESCRIPTION
Seismic data acquisition systems
DVMs
The AD7693 is a 16-bit, successive approximation, analog-to-
digital converter (ADC) that operates from a single power supply,
VDD. It contains a low power, high speed, 16-bit sampling ADC
with no missing codes, an internal conversion clock, and a
versatile serial interface port. On the CNV rising edge, it
samples the voltage difference between the IN+ and IN− pins.
The voltages on these pins swing in opposite phase between 0 V
and REF. The reference voltage, REF, is applied externally and
can be set up to the supply voltage, VDD.
Instrumentation
Medical instruments
Its power scales linearly with throughput.
The SPI-compatible serial interface also features the ability,
using the SDI input, to daisy-chain several ADCs on a single,
3-wire bus and provides an optional busy indicator. It is compatible
with 1.8 V, 2.5 V, 3 V, or 5 V logic, using the separate VIO supply.
The AD7693 is housed in a 10-lead MSOP or a 10-lead QFN1
(LFCSP) with operation specified from −40°C to +85°C.
Figure 1. Integral Nonlinearity vs. Code
1 QFN package in development. Contact sales for samples and availability.
Rev. PrB
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.