16-Bit, ꢀ1 LSB INL,
500 kSPS, Differential ADC
a
AD7676
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Throughput: 500 kSPS
AVDD AGND REF REFGND
DVDD DGND
INL: ꢀ1 LSB Max (ꢀ0.0015% of Full Scale)
16-Bit Resolution with No Missing Codes
S/(N+D): 94 dB Typ @ 45 kHz
OVDD
OGND
AD7676
THD: –110 dB Typ @ 45 kHz
Differential Input Range: ꢀ2.5 V
Both AC and DC Specifications
SERIAL
PORT
IN+
IN–
SWITCHED
CAP DAC
SER/PAR
BUSY
D[15:0]
CS
No Pipeline Delay
16
Parallel (8 Bits/16 Bits) and Serial 5 V/3 V Interface
SPI™/QSPI™/MICROWIRE™/DSP Compatible
Single 5 V Supply Operation
67 mW Typical Power Dissipation, 15 ꢁW @ 100 SPS
Power-Down Mode: 7 ꢁW Max
PARALLEL
INTERFACE
CLOCK
PD
CONTROL LOGIC AND
CALIBRATION CIRCUITRY
RD
RESET
OB/2C
BYTESWAP
Packages: 48-Lead Quad Flatpack (LQFP)
48-Lead Frame Chip Scale (LFCSP)
Pin-to-Pin Compatible with the AD7675
CNVST
Table I. PulSAR Selection
APPLICATIONS
CT Scanners
Type/kSPS
100–250
500–570
800–1000
Data Acquisition
Instrumentation
Spectrum Analysis
Medical Instruments
Battery-Powered Systems
Process Control
Pseudo Differential
AD7660
AD7650
AD7664
True Bipolar
True Differential
18-Bit
AD7663
AD7675
AD7678
AD7665
AD7676
AD7679
AD7654
AD7671
AD7677
AD7674
Simultaneous/
Multichannel
GENERAL DESCRIPTION
The AD7676 is a 16-bit, 500 kSPS, charge redistribution SAR,
fully differential analog-to-digital converter (ADC) that oper-
ates from a single 5 V power supply. The part contains a high
speed 16-bit sampling ADC, an internal conversion clock,
error correction circuits, and both serial and parallel system
interface ports.
PRODUCT HIGHLIGHTS
1. Excellent INL
The AD7676 has a maximum integral nonlinearity of 1.0 LSB
with no missing 16-bit code.
The AD7676 is hardware factory-calibrated and is comprehen-
sively tested to ensure such ac parameters as signal-to-noise ratio
(SNR) and total harmonic distortion (THD), in addition to the
more traditional dc parameters of gain, offset, and linearity.
2. Superior AC Performances
The AD7676 has a minimum dynamic of 92 dB, 94 dB typical.
3. Fast Throughput
The AD7676 is a 500 kSPS, charge redistribution, 16-bit
It is fabricated using Analog Devices’ high performance, 0.6 micron
CMOS process and is available in a 48-lead LQFP or a tiny
48-lead LFCSP with operation specified from –40°C to +85°C.
SAR ADC with internal error correction circuitry.
4. Single-Supply Operation
The AD7676 operates from a single 5 V supply and typically
dissipates only 67 mW. It consumes 7 µW maximum when in
power-down.
5. Serial or Parallel Interface
Versatile parallel (8 bits or 16 bits) or 2-wire serial interface
arrangement compatible with either 3 V or 5 V logic.
SPI and QSPI are trademarks of Motorola, Inc.
MIRCOWIRE is a trademark of National Semiconductor Corporation.
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2002