1 MSPS, 12-/10-/8-Bit ADCs
in 6-Lead SOT-23
AD7476/AD7477/AD7478
FUNCTIONAL BLOCK DIAGRAM
FEATURES
V
Fast throughput rate: 1 MSPS
Specified for VDD of 2.35 V to 5.25 V
Low power
DD
12-/10-/8-BIT
SUCCESSIVE-
APPROXIMATION
ADC
V
3.6 mW at 1 MSPS with 3 V supplies
15 mW at 1 MSPS with 5 V supplies
Wide input bandwidth
IN
70 dB SNR at 100 kHz input frequency
Flexible power/serial clock speed management
No pipeline delays
SCLK
SDATA
CS
CONTROL
LOGIC
High speed serial interface
AD7476/AD7477/AD7478
SPI®-/QSPI™-/MICROWIRE™-/DSP-compatible
Standby mode: 1 μA maximum
6-lead SOT-23 package
GND
Figure 1.
APPLICATIONS
Battery-powered systems
Personal digital assistants
Medical instruments
Mobile communications
Instrumentation and control systems
Data acquisition systems
High speed modems
Optical sensors
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The AD7476/AD7477/AD74781 are, respectively, 12-bit, 10-bit,
and 8-bit, high speed, low power, successive approximation
ADCs. The parts operate from a single 2.35 V to 5.25 V power
supply and feature throughput rates up to 1 MSPS. Each part
contains a low noise, wide bandwidth track-and-hold amplifier
that can handle input frequencies in excess of 6 MHz.
1. First 12-/10-/8-Bit ADCs in SOT-23 Packages.
2. High Throughput with Low Power Consumption.
3. Flexible Power/Serial Clock Speed Management. The
conversion rate is determined by the serial clock, allowing
the conversion time to be reduced through the serial clock
speed increase. This allows the average power consumption
to be reduced while not converting. The parts also feature a
shutdown mode to maximize power efficiency at lower
throughput rates. Current consumption is 1 μA maximum
when in shutdown mode.
The conversion process and data acquisition are controlled
CS
using
with microprocessors or DSPs. The input signal is sampled on
CS
and the serial clock, allowing the devices to interface
the falling edge of
and the conversion is initiated at this
point. There are no pipeline delays associated with these parts.
4. Reference Derived from the Power Supply.
The AD7476/AD7477/AD7478 use advanced design techniques
to achieve very low power dissipation at high throughput rates.
The reference for the parts is taken internally from VDD. This
allows the widest dynamic input range to the ADC. Thus, the
analog input range for the parts are 0 V to VDD. The conversion
rate is determined by the SCLK.
5. No Pipeline Delay. The parts feature a standard successive-
approximation ADC with accurate control of the sampling
CS
instant via a
input and once-off conversion control.
1 Protected by U.S. Patent No. 6,681,332.
Rev. F
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2000–2009 Analog Devices, Inc. All rights reserved.