Datasheet > AD7472ARU-REEL7

AD7472ARU-REEL7

更新时间： 2024-11-06 12:52:31

品牌	Logo	应用领域
亚德诺 - ADI		/
页数	文件大小	规格书
20页	325K
描述
1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs

阅读下载

中文翻译

获取价格

数据手册
替代型号

如果您发现信息不准确，欢迎纠错

AD7472ARU-REEL7 数据手册

1.75 MSPS, 4 mW

10-Bit/12-Bit Parallel ADCs

AD7470/AD7472

FUNCTIONAL BLOCK DIAGRAM

FEATURES

Specified for V_DDof 2.7 V to 5.25 V

1.75 MSPS for AD7470 (10-Bit)

REF IN

DRIVE

1.5 MSPS for AD7472 (12-Bit)

Low Power

DB9 (DB11)

DB0

10-/12-BIT

AD7470: 3.34 mW Typ at 1.5 MSPS with 3 V Supplies

7.97 mW Typ at 1.75 MSPS with 5 V Supplies

AD7472: 3.54 mW Typ at 1.2 MSPS with 3 V Supplies

8.7 mW Typ at 1.5 MSPS with 5 V Supplies

Wide Input Bandwidth

70 dB Typ SNR at 500 kHz Input Frequency

Flexible Power/Throughput Rate Management

No Pipeline Delays

SUCCESSIVE

OUTPUT

DRIVERS

T/H

APPROXIMATION

ADC

CLK IN

CONTROL

LOGIC

CONVST

High Speed Parallel Interface

Sleep Mode: 50 nA Typ

24-Lead SOIC and TSSOP Packages

BUSY

AD7470/AD7472

AGND

DGND

GENERAL DESCRIPTION

AD7470 IS A 10-BIT PART WITH DB0 TO DB9 AS OUTPUTS.

AD7472 IS A 12-BIT PART WITH DB0 TO DB11 AS OUTPUTS.

The AD7470/AD7472 are 10-bit/12-bit high speed, low power,

successive approximation ADCs. The parts operate from a single

2.7 V to 5.25 V power supply and feature throughput rates up to

1.5 MSPS for the 12-bit AD7472 and up to 1.75 MSPS for the

10-bit AD7470. The parts contain a low noise, wide bandwidth

track-and-hold amplifier that can handle input frequencies in

excess of 1 MHz.

It is also possible to operate the parts in an auto sleep mode,

where the part wakes up to do a conversion and automatically

enters sleep mode at the end of conversion. This method allows

very low power dissipation numbers at lower throughput rates.

In this mode, the AD7472 can be operated with 3 V supplies at

100 kSPS, and consume an average current of just 124 µA. At

5 V supplies and 100 kSPS, the average current consumption is

171 µA.

The conversion process and data acquisition are controlled

using standard control inputs, allowing easy interfacing to

microprocessors or DSPs. The input signal is sampled on the

falling edge of CONVST, and conversion is also initiated at

this point. BUSY goes high at the start of conversion and

goes low 531.66 ns after falling edge of CONVST (AD7472

with a clock frequency of 26 MHz) to indicate that the con-

version is complete. There are no pipeline delays associated

with the parts. The conversion result is accessed via standard

CS and RD signals over a high speed parallel interface.

The analog input range for the part is 0 V to REF IN. The 2.5 V

reference is applied externally to the REF IN pin. The conver-

sion rate is determined by the externally-applied clock.

PRODUCT HIGHLIGHTS

1. High Throughput with Low Power Consumption. The

AD7470 offers 1.75 MSPS throughput and the AD7472

offers 1.5 MSPS throughput rates with 4 mW power

consumption.

The AD7470/AD7472 use advanced design techniques to

achieve very low power dissipation at high throughput rates. With

3 V supplies and 1.5 MSPS throughput rates, the AD7470

typically consumes, on average, just 1.1 mA. With 5 V supplies

and 1.75 MSPS, the average current consumption is typically

1.6 mA. The part also offers flexible power/throughput rate

management. Operating the AD7470 with 3 V supplies and

500 kSPS throughput reduces the current consumption to 713 µA.

At 5 V supplies and 500 kSPS, the part consumes 944 µA.

2. Flexible Power/Throughput Rate Management. The conver-

sion rate is determined by an externally-applied clock allow-

ing the power to be reduced as the conversion rate is reduced.

The part also features an auto sleep mode to maximize power

efficiency at lower throughput rates.

3. No Pipeline Delay. The part features a standard successive

approximation ADC with accurate control of the sampling

instant via a CONVST input and once off conversion control.

REV. B

Information furnished by Analog Devices is believed to be accurate and

reliable. However, no responsibility is assumed by Analog Devices for its

use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat

may result from its use. No license is granted by implication or otherwise

under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781/329-4700

Fax: 781/326-8703

www.analog.com

12 3 4 5 6 7...20

中文翻译

下载PDF

AD7472ARU-REEL7 替代型号

型号	品牌	替代类型	描述	数据表
AD7472ARU-REEL	ADI	完全替代	1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs
AD7472ARU	ADI	完全替代	1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs

与AD7472ARU-REEL7相关器件

型号	品牌	获取价格	描述	数据表
AD7472ARUZ	ADI	获取价格	12-Bit, 2.7 V to 5.25 V, 1.5 MSPS Low Power ADC
AD7472ARUZ-REEL7	ROCHESTER	获取价格	1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDSO24, TSSOP-24
AD7472ARZ	ADI	获取价格	1.75 MSPS, 4 mW 10-Bit-12-Bit Parallel ADCs
AD7472BR	ADI	获取价格	1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs
AD7472BR	ROCHESTER	获取价格	1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDSO24, SOIC-24
AD7472BR-REEL	ADI	获取价格	1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs
AD7472BRU	ADI	获取价格	1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs
AD7472BRU-REEL	ADI	获取价格	1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs
AD7472BRU-REEL7	ADI	获取价格	1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs
AD7472BRUZ	ADI	获取价格	12-Bit, 2.7 V to 5.25 V, 1.5 MSPS Low Power ADC

与AD7472ARU-REEL7相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

14
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

12
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

36
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

33

产品中心

服务支持

精选活动

关于我们

帮助中心

AD7472ARU-REEL7

AD7472ARU-REEL7 数据手册

AD7472ARU-REEL7 替代型号

与AD7472ARU-REEL7相关器件

与AD7472ARU-REEL7相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

AD7472ARU-REEL7

AD7472ARU-REEL7 数据手册

AD7472ARU-REEL7 替代型号

与AD7472ARU-REEL7相关器件

与AD7472ARU-REEL7相关文章

您还可以找

您在本页遇到什么问题？