5秒后页面跳转
AD581KH PDF预览

AD581KH

更新时间: 2024-02-04 05:08:47
品牌 Logo 应用领域
亚德诺 - ADI 电源电路参考电压源PC
页数 文件大小 规格书
6页 221K
描述
High Precision 10 V IC Reference

AD581KH 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
包装说明:METAL CAN, TO-39, 3 PINReach Compliance Code:not_compliant
风险等级:5.91JESD-30 代码:O-MBCY-W3
JESD-609代码:e0功能数量:1
输出次数:1端子数量:3
最高工作温度:125 °C最低工作温度:-55 °C
最大输出电压:10.005 V最小输出电压:9.995 V
标称输出电压:10 V封装主体材料:METAL
封装等效代码:CAN3/4,.2封装形状:ROUND
封装形式:CYLINDRICAL子类别:Voltage References
最大供电电压 (Vsup):30 V最小供电电压 (Vsup):12.5 V
标称供电电压 (Vsup):15 V表面贴装:NO
技术:BIPOLAR最大电压温度系数:10 ppm/ °C
温度等级:MILITARY端子面层:Tin/Lead (Sn/Pb)
端子形式:WIRE端子位置:BOTTOM
微调/可调输出:NO最大电压容差:0.05%
Base Number Matches:1

AD581KH 数据手册

 浏览型号AD581KH的Datasheet PDF文件第1页浏览型号AD581KH的Datasheet PDF文件第2页浏览型号AD581KH的Datasheet PDF文件第3页浏览型号AD581KH的Datasheet PDF文件第5页浏览型号AD581KH的Datasheet PDF文件第6页 
AD581  
the initial tolerance is 10 mV, the temperature error band is  
15 mV, thus the unit is guaranteed to be 10.000 volts 25 mV  
from –55°C to +125°C).  
OUTPUT CURRENT CHARACTERISTICS  
The AD581 has the capability to either source or sink current  
and provide good load regulation in either direction, although it  
has better characteristics in the source mode (positive current  
into the load). The circuit is protected for shorts to either posi-  
tive supply or ground. The output voltage vs. output current  
characteristics of the device are shown in Figure 5. Source cur-  
rent is displayed as negative current in the figure; sink current is  
positive. Note that the short circuit current (i.e., zero volts out-  
put) is about 28 mA; when shorted to +15 volts, the sink cur-  
rent goes to about 20 mA.  
Figure 7. Spectral Noise Density and Total rms Noise  
vs. Frequency  
Figure 8. Quiescent Current vs. Temperature  
Figure 5. AD581 Output Voltage vs. Sink and Source Current  
PRECISION HIGH CURRENT SUPPLY  
The AD581 can be easily connected with power pnp or power  
Darlington pnp devices to provide much greater output current  
capability. The circuit shown in Figure 9 delivers a precision  
10 volt output with up to 4 amperes supplied to the load. The  
0.1 µF capacitor is required only if the load has a significant  
capacitive component. If the load is purely resistive, improved  
high frequency supply rejection results from removing the  
capacitor.  
DYNAMIC PERFORMANCE  
Many low power instrument manufacturers are becoming in-  
creasingly concerned with the turn-on characteristics of the  
components being used in their systems. Fast turn-on compo-  
nents often enable the end user to keep power off when not  
needed, and yet respond quickly when the power is turned on  
for operation. Figure 6 displays the turn-on characteristic of  
the AD581. This characteristic is generated from cold-start  
operation and represents the true turn-on waveform after an  
extended period with the supplies off. The figure shows both the  
coarse and fine transient characteristics of the device; the total  
settling time to within 10 millivolt is about 180 µs, and there is  
no long thermal tail appearing after the point.  
Figure 9. High Current Precision Supply  
Figure 6. Output Settling Characteristic  
4–  
REV. B  

AD581KH 替代型号

型号 品牌 替代类型 描述 数据表
AD581TH ADI

类似代替

High Precision 10 V IC Reference
AD581JH ADI

完全替代

High Precision 10 V IC Reference

与AD581KH相关器件

型号 品牌 获取价格 描述 数据表
AD581KH/+ ADI

获取价格

AD581KH/+
AD581KH1 ADI

获取价格

High Precision 10 V IC Reference
AD581L ADI

获取价格

High Precision 10 V IC Reference
AD581LCSA ETC

获取价格

Voltage Reference
AD581LH ADI

获取价格

High Precision 10 V IC Reference
AD581LH/+ ADI

获取价格

暂无描述
AD581LH1 ADI

获取价格

High Precision 10 V IC Reference
AD581S ADI

获取价格

High Precision 10 V IC Reference
AD581SH ADI

获取价格

High Precision 10 V IC Reference
AD581SH/883 ETC

获取价格

Voltage Reference