Single-Channel, 16-Bit Current and Voltage Output
DAC with Dynamic Power Control and
Data Sheet
AD5758
FEATURES
GENERAL DESCRIPTION
16-bit resolution and monotonicity
DPC for thermal management
The AD5758 is a single-channel, voltage and current output digital-
to-analog converter (DAC) that operates with a power supply range
Current/voltage output available on a single terminal
Current output ranges: 0 mA to 20 mA, 4 mA to 20 mA,
0 mA to 24 mA, 20 mA, 24 mA, −1 mA to +22 mA
Voltage output ranges (with 20% overrange): 0 V to 5 V,
0 V to 10 V, 5 V, and 10 V
User-programmable offset and gain
Advanced on-chip diagnostics, including a 12-bit ADC
On-chip reference
from −33 V (minimum) on AVSS to +33 V (maximum) on AVDD1
with a maximum operating voltage between the two rails of 60 V.
On-chip dynamic power control (DPC) minimizes package power
dissipation, which is achieved by regulating the supply voltage
(VDPC+) to the VIOUT output driver circuitry from 5 V to 27 V using
a buck dc-to-dc converter, optimized for minimum on-chip power
dissipation. The CHART pin enables a HART® signal to be coupled
onto the current output.
Robust architecture, including output fault protection
−40°C to +115°C temperature range
32-lead, 5 mm × 5 mm LFCSP package
The device uses a versatile 4-wire serial peripheral interface
(SPI) that operates at clock rates of up to 50 MHz and is
compatible with standard SPI, QSPI™, MICROWIRE™, DSP, and
microcontroller interface standards. The interface also features an
optional SPI cyclic redundancy check (CRC) and a watchdog
timer (WDT). The AD5758 offers improved diagnostic features
from its predecessors, such as output current monitoring and an
integrated 12-bit diagnostic analog-to-digital converter (ADC).
Additional robustness is provided by the inclusion of a fault
protection switch on the VIOUT, +VSENSE, and −VSENSE pins.
APPLICATIONS
Process control
Actuator control
Channel isolated analog outputs
Programmable logic controller (PLC) and distributed control
systems (DCS) applications
HART network connectivity
PRODUCT HIGHLIGHTS
1. Range of diagnostic features, including integrated ADC.
2. DPC, using an integrated buck dc-to-dc converter for
thermal management, enabling higher channel count in
smaller size module housing.
3. Programmable power control (PPC) mode to enable faster
settling time (15 μs typical).
4. 16-bit performance.
5. HART compliant.
COMPANION PRODUCTS
Product Family: AD5755-1, AD5422
HART Modem: AD5700, AD5700-1
External References: ADR431, ADR3425, ADR4525
Digital Isolators: ADuM142D, ADuM141D
Power: LT8300, ADP2360, ADM6339
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2018 Analog Devices, Inc. All rights reserved.
www.analog.com