Low Power HART Modem
AD5700/AD5700-1
Data Sheet
FEATURES
GENERAL DESCRIPTION
HART-compliant fully integrated FSK modem
1200 Hz and 2200 Hz sinusoidal shift frequencies
115 μA maximum supply current in receive mode
Suitable for intrinsically safe applications
Integrated receive band-pass filter
Minimal external components required
Clocking optimized for various system configurations
Ultralow power crystal oscillator (60 μA maximum)
External CMOS clock source
Precision internal oscillator (AD5700-1 only)
Buffered HART output—extra drive capability
8 kV HBM ESD rating
2 V to 5.5 V power supply
1.71 V to 5.5 V interface
The AD5700/AD5700-1 are single-chip solutions, designed
and specified to operate as a HART® FSK half-duplex modem,
complying with the HART physical layer requirements. The
AD5700/AD5700-1 integrate all of the necessary filtering, signal
detection, modulating, demodulating and signal generation
functions, thus requiring few external components. The 0.5%
precision internal oscillator on the AD5700-1 greatly reduces
the board space requirements, making it ideal for line-powered
applications in both master and slave configurations. The maxi-
mum supply current consumption is 115 μA, making the AD5700/
AD5700-1 an optimal choice for low power loop-powered applica-
tions. Transmit waveforms are phase continuous 1200 Hz and
2200 Hz sinusoids. The AD5700/AD5700-1 contain accurate
carrier detect circuitry and use a standard UART interface.
−40°C to +125°C operation
4 mm × 4 mm LFCSP package
HART physical layer compliant
UART interface
Table 1. Related Products
Part No.
Description
AD5755-1
Quad-channel, 16-bit, serial input, 4 mA to 20 mA and
voltage output DAC, dynamic power control, HART
connectivity
APPLICATIONS
Field transmitters
AD5421
16-bit, serial input, loop powered, 4 mA to 20 mA DAC
AD5410/
AD5420
AD5412/
AD5422
Single-channel, 12-bit/16-bit, serial input, 4 mA to 20 mA
current source DACs
Single-channel, 12-bit/16-bit, serial input, current
source and voltage output DACs
HART multiplexers
PLC and DCS analog I/O modules
HART network connectivity
FUNCTIONAL BLOCK DIAGRAM
CLKOUT XTAL1 XTAL2 XTAL_EN
V
REG_CAP
CC
IOV
CC
OSC
AD5700/AD5700-1
DUPLEX
CD
BUFFER
FSK
DAC
HART_OUT
MODULATOR
RXD
TXD
RTS
ADC_IP
BAND-PASS
FILTER AND
BIASING
FSK
DEMODULATOR
ADC
HART_IN
CLK_CFG0
CLK_CFG1
VOLTAGE
REFERENCE
RESET
DGND
REF REF_EN
AGND
FILTER_SEL
Figure 1.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2012 Analog Devices, Inc. All rights reserved.