5秒后页面跳转
AD5621BKSZ-REEL7 PDF预览

AD5621BKSZ-REEL7

更新时间: 2024-01-21 06:42:01
品牌 Logo 应用领域
亚德诺 - ADI /
页数 文件大小 规格书
24页 466K
描述
2.7 V to 5.5 V, <100 μA, 8-/10-/12-Bit nanoDAC, SPI Interface in LFCSP and SC70

AD5621BKSZ-REEL7 数据手册

 浏览型号AD5621BKSZ-REEL7的Datasheet PDF文件第16页浏览型号AD5621BKSZ-REEL7的Datasheet PDF文件第17页浏览型号AD5621BKSZ-REEL7的Datasheet PDF文件第18页浏览型号AD5621BKSZ-REEL7的Datasheet PDF文件第20页浏览型号AD5621BKSZ-REEL7的Datasheet PDF文件第21页浏览型号AD5621BKSZ-REEL7的Datasheet PDF文件第22页 
Data Sheet  
AD5601/AD5611/AD5621  
USING THE AD5601/AD5611/AD5621 WITH A  
GALVANICALLY ISOLATED INTERFACE  
POWER SUPPLY BYPASSING AND GROUNDING  
When accuracy is important in a circuit, it is helpful to carefully  
consider the power supply and ground return layout on the  
board. The PCB containing the AD5601/AD5611/AD5621  
should have separate analog and digital sections, each having its  
own area of the board. If the AD5601/AD5611/AD5621 are in a  
system where other devices require an AGND-to-DGND  
connection, the connection should be made at one point only.  
This ground point should be as close as possible to the  
AD5601/AD5611/AD5621.  
In process control applications in industrial environments,  
it is often necessary to use a galvanically isolated interface to  
protect and isolate the controlling circuitry from any hazardous  
common-mode voltages that might occur in the area where the  
DAC is functioning. iCoupler® provides isolation in excess of  
2.5 kV. Because the AD5601/AD5611/AD5621 use a 3-wire serial  
logic interface, the ADuM1300 3-channel digital isolator  
provides the required isolation (see Figure 53). The power  
supply to the part also needs to be isolated, which is done by  
using a transformer. On the DAC side of the transformer, a 5 V  
regulator provides the 5 V supply required for the AD5601/  
AD5611/AD5621.  
The power supply to the AD5601/AD5611/AD5621 should be  
bypassed with 10 µF and 0.1 µF capacitors. The capacitors  
should be physically as close as possible to the device, with the  
0.1 µF capacitor ideally right up against the device. The 10 µF  
capacitors are the tantalum bead type. It is important that the  
0.1 µF capacitor have low effective series resistance (ESR) and  
effective series inductance (ESI), such as in common ceramic  
types of capacitors. This 0.1 µF capacitor provides a low imped-  
ance path to ground for high frequencies caused by transient  
currents due to internal logic switching.  
5V  
REGULATOR  
POWER  
10µF  
0.1µF  
V
DD  
SCLK  
V
V
SCLK  
IA  
OA  
The power supply line itself should have as large a trace as  
possible to provide a low impedance path and reduce glitch  
effects on the supply line. Clocks and other fast switching  
digital signals should be shielded from other parts of the board  
by digital ground. Avoid crossover of digital and analog signals,  
if possible. When traces cross on opposite sides of the board,  
ensure that they run at right angles to each other to reduce  
feedthrough effects on the board. The best board layout tech-  
nique is the microstrip technique, where the component side of  
the board is dedicated to the ground plane only and the signal  
traces are placed on the solder side. However, this is not always  
possible with a two-layer board.  
ADuM1300  
AD5601/  
AD5611/  
AD5621  
V
OUT  
SDI  
V
V
V
V
SYNC  
SDIN  
IB  
IC  
OB  
OC  
DATA  
GND  
Figure 53. AD5601/AD5611/AD5621 with a Galvanically Isolated Interface  
Rev. G | Page 19 of 24  
 
 
 

与AD5621BKSZ-REEL7相关器件

型号 品牌 描述 获取价格 数据表
AD5622 ADI 2.7 V to 5.5 V, <100 uA, 8-/10-/12-Bit nanoDACs with

获取价格

AD5622ACPZ-2-RL7 ADI 2.7 V to 5.5 V, nanoDAC&reg; with I<sup>2</sup>C Compatible Interface, Tin

获取价格

AD5622AKSZ-2 ADI IC SERIAL INPUT LOADING, 6 us SETTLING TIME, 12-BIT DAC, PDSO6, LEAD FREE, PLASTIC, MO-203

获取价格

AD5622AKSZ-2500RL7 ADI 2.7 V to 5.5 V, <100 uA, 8-/10-/12-Bit nanoDACs with

获取价格

AD5622AKSZ-2REEL7 ADI 2.7 V to 5.5 V, <100 uA, 8-/10-/12-Bit nanoDACs with

获取价格

AD5622BKSZ-2 ADI IC SERIAL INPUT LOADING, 6 us SETTLING TIME, 12-BIT DAC, PDSO6, LEAD FREE, PLASTIC, MO-203

获取价格