5秒后页面跳转
AD5622YKSZ-2 PDF预览

AD5622YKSZ-2

更新时间: 2024-02-02 21:20:48
品牌 Logo 应用领域
亚德诺 - ADI 输入元件光电二极管转换器
页数 文件大小 规格书
24页 542K
描述
IC SERIAL INPUT LOADING, 6 us SETTLING TIME, 12-BIT DAC, PDSO6, LEAD FREE, PLASTIC, MO-203AB, SC-70, 6 PIN, Digital to Analog Converter

AD5622YKSZ-2 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Obsolete零件包装代码:TSSOP
包装说明:TSSOP, TSSOP6,.08针数:6
Reach Compliance Code:compliant风险等级:5.68
最大模拟输出电压:5.5 V最小模拟输出电压:
转换器类型:D/A CONVERTER输入位码:BINARY
输入格式:SERIALJESD-30 代码:R-PDSO-G6
长度:2 mm最大线性误差 (EL):0.0488%
位数:12功能数量:1
端子数量:6最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:TSSOP封装等效代码:TSSOP6,.08
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
峰值回流温度(摄氏度):NOT SPECIFIED电源:3/5 V
认证状态:Not Qualified座面最大高度:1.1 mm
标称安定时间 (tstl):6 µs子类别:Other Converters
最大压摆率:0.1 mA标称供电电压:3 V
表面贴装:YES技术:CMOS
温度等级:AUTOMOTIVE端子形式:GULL WING
端子节距:0.65 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:1.25 mm
Base Number Matches:1

AD5622YKSZ-2 数据手册

 浏览型号AD5622YKSZ-2的Datasheet PDF文件第2页浏览型号AD5622YKSZ-2的Datasheet PDF文件第3页浏览型号AD5622YKSZ-2的Datasheet PDF文件第4页浏览型号AD5622YKSZ-2的Datasheet PDF文件第5页浏览型号AD5622YKSZ-2的Datasheet PDF文件第6页浏览型号AD5622YKSZ-2的Datasheet PDF文件第7页 
2.7 V to 5.5 V, <100 μA, 8-/10-/12-Bit nanoDAC™  
with I2C-Compatible Interface, Tiny SC70 Package  
AD5602/AD5612/AD5622  
FEATURES  
Single 8-/10-/12-bit DAC, 2 LSB INL  
6-lead SC70 package  
FUNCTIONAL BLOCK DIAGRAM  
V
DD  
GND  
POWER-ON  
RESET  
Micropower operation: max 100 μA @ 5 V  
Power-down to <150 nA @ 3 V  
2.7 V to 5.5 V power supply  
Guaranteed monotonic by design  
Power-on reset to 0 V with brownout detection  
3 power-down functions  
AD5602/AD5612/AD5622  
REF(+)  
DAC  
REGISTER  
OUTPUT  
BUFFER  
V
8-/10-/12-BIT  
DAC  
OUT  
I2C®-compatible serial interface supports standard (100 kHz),  
fast (400 kHz), and high speed (3.4 MHz) modes  
INPUT  
CONTROL  
LOGIC  
POWER-DOWN  
CONTROL LOGIC  
RESISTOR  
NETWORK  
On-chip output buffer amplifier, rail-to-rail operation  
APPLICATIONS  
Process control  
ADDR  
SCL SDA  
Data acquisition systems  
Figure 1.  
Portable battery-powered instruments  
Digital gain and offset adjustment  
Programmable voltage and current sources  
Programmable attenuators  
Table 1. Related Devices  
Part No.  
Description  
AD5601/AD5611/AD5621 2.7 V to 5.5 V, <100 μA, 8-/10-/12-bit  
nanoDAC D/A with SPI® interface in  
a tiny SC70 package  
GENERAL DESCRIPTION  
PRODUCT HIGHLIGHTS  
The AD5602/AD5612/AD5622, members of the nanoDAC  
family, are single, 8-/10-/12-bit buffered voltage-out DACs that  
operate from a single 2.7 V to 5.5 V supply, consuming <100 μA  
at 5 V. These DACs come in tiny SC70 packages. Each DAC  
contains an on-chip precision output amplifier that allows rail-  
to-rail output swing to be achieved.  
1. Available in 6-lead SC70.  
2. Maximum 100 μA power consumption, single-supply  
operation. These parts operate from a single 2.7 V to 5.5 V  
supply typically consuming 0.2 mW at 3 V and 0.4 mW at  
5 V, making them ideal for battery-powered applications.  
3. The on-chip output buffer amplifier allows the output of  
the DAC to swing rail-to-rail with a typical slew rate of  
0.5 V/μs.  
The AD5602/AD5612/AD5622 use a 2-wire I2C-compatible  
serial interface that operates in standard (100 kHz), fast  
(400 kHz), and high speed (3.4 MHz) modes.  
4. Reference derived from the power supply.  
5. Standard, fast, and high speed mode I2C interface.  
6. Designed for very low power consumption.  
The references for AD5602/AD5612/AD5622 are derived from  
the power supply inputs to give the widest dynamic output range.  
Each part incorporates a power-on reset circuit that ensures the  
DAC output powers up to 0 V and remains there until a valid  
write takes place to the device. The parts contain a power-down  
feature that reduces the current consumption of the devices to  
<100 nA at 3 V and provides software-selectable output loads  
while in power-down mode. The parts are put into power-down  
mode over the serial interface. The low power consumption of  
the AD5602/AD5612/AD5622 in normal operation makes them  
ideally suited for use in portable battery-operated equipment. The  
typical power consumption is 0.4 mW at 5 V.  
7. Power-down capability. When powered down, the DAC  
typically consumes <150 nA at 3 V.  
8. Power-on reset and brownout detection.  
Rev. 0  
Information furnished by Analog Devices is believed to be accurate and reliable.  
However, no responsibility is assumed by Analog Devices for its use, nor for any  
infringements of patents or other rights of third parties that may result from its use.  
Specifications subject to change without notice. No license is granted by implication  
or otherwise under any patent or patent rights of Analog Devices. Trademarks and  
registered trademarks are the property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
© 2005 Analog Devices, Inc. All rights reserved.  

与AD5622YKSZ-2相关器件

型号 品牌 描述 获取价格 数据表
AD5622YKSZ-2500RL7 ADI 2.7 V to 5.5 V, <100 uA, 8-/10-/12-Bit nanoDACs with

获取价格

AD5622YKSZ-2REEL7 ADI 2.7 V to 5.5 V, <100 uA, 8-/10-/12-Bit nanoDACs with

获取价格

AD5623R ADI Dual 12-/14-/16-Bit nanoDAC with 5 ppm/C On-Chip Reference

获取价格

AD5623R_15 ADI Dual 12-/14-/16-Bit nanoDAC

获取价格

AD5623RACPZ-5REEL7 ADI Dual 12-/14-/16-Bit nanoDAC with 5 ppm/ C On-Chip Reference

获取价格

AD5623RARMZ-5 ADI Dual 12-/14-/16-Bit nanoDAC with 5 ppm/C On-Chip Reference

获取价格