Datasheet > 转换器 > 数模转换器> AD5622BKSZ-2500RL7

AD5622BKSZ-2500RL7

更新时间： 2024-02-02 06:31:38

品牌	Logo	应用领域
亚德诺 - ADI		转换器数模转换器光电二极管
页数	文件大小	规格书
24页	560K
描述
2.7 V to 5.5 V, <100 uA, 8-/10-/12-Bit nanoDACs with

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

AD5622BKSZ-2500RL7 技术参数

是否无铅：	含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	TSSOP
包装说明：	VSSOP, TSSOP6,.08	针数：	6
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	1.7
Is Samacsys：	N	最大模拟输出电压：	5.5 V
最小模拟输出电压：		转换器类型：	D/A CONVERTER
输入位码：	BINARY	输入格式：	SERIAL
JESD-30 代码：	R-PDSO-G6	JESD-609代码：	e4
长度：	2 mm	最大线性误差 (EL)：	0.0488%
湿度敏感等级：	1	位数：	12
功能数量：	1	端子数量：	6
最高工作温度：	85 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	VSSOP
封装等效代码：	TSSOP6,.08	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	峰值回流温度（摄氏度）：	260
电源：	3/5 V	认证状态：	Not Qualified
座面最大高度：	1 mm	最大稳定时间：	10 µs
标称安定时间 (tstl)：	6 µs	子类别：	Other Converters
最大压摆率：	0.1 mA	标称供电电压：	3 V
表面贴装：	YES	技术：	CMOS
温度等级：	INDUSTRIAL	端子面层：	Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式：	GULL WING	端子节距：	0.65 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	40
宽度：	1.25 mm	Base Number Matches：	1

AD5622BKSZ-2500RL7 数据手册

浏览型号AD5622BKSZ-2500RL7的Datasheet PDF文件第2页

浏览型号AD5622BKSZ-2500RL7的Datasheet PDF文件第3页

浏览型号AD5622BKSZ-2500RL7的Datasheet PDF文件第4页

浏览型号AD5622BKSZ-2500RL7的Datasheet PDF文件第5页

浏览型号AD5622BKSZ-2500RL7的Datasheet PDF文件第6页

浏览型号AD5622BKSZ-2500RL7的Datasheet PDF文件第7页

2.7 V to 5.5 V, <100 μA, 8-/10-/12-Bit nanoDACs^®with

I²C^®-Compatible Interface, Tiny SC70 Package

AD5602/AD5612/AD5622

FUNCTIONAL BLOCK DIAGRAM

FEATURES

Single 8-, 10-, 12-bit DACs, 2 LSB INL

6-lead SC70 package

GND

POWER-ON

RESET

Micropower operation: 100 μA max @ 5 V

Power-down to <150 nA @ 3 V

2.7 V to 5.5 V power supply

Guaranteed monotonic by design

Power-on reset to 0 V with brownout detection

3 power-down functions

AD5602/AD5612/AD5622

REF(+)

DAC

OUTPUT

BUFFER

8-/10-/12-BIT

DAC

OUT

I²C-compatible serial interface supports standard (100 kHz),

fast (400 kHz), and high speed (3.4 MHz) modes

INPUT

CONTROL

LOGIC

POWER-DOWN

CONTROL LOGIC

RESISTOR

NETWORK

On-chip output buffer amplifier, rail-to-rail operation

APPLICATIONS

ADDR

SCL SDA

Process control

Figure 1.

Data acquisition systems

Portable battery-powered instruments

Digital gain and offset adjustment

Programmable voltage and current sources

Programmable attenuators

Table 1. Related Devices

Part No.

AD5601/AD5611/AD5621 2.7 V to 5.5 V, <100 μA, 8-, 10-, 12-bit

nanoDAC with SPI® interface in a

Description

tiny SC70 package

GENERAL DESCRIPTION

PRODUCT HIGHLIGHTS

The AD5602/AD5612/AD5622, members of the nanoDAC

family, are single 8-, 10-, 12-bit buffered voltage-out DACs that

operate from a single 2.7 V to 5.5 V supply, consuming <100 μA

at 5 V. These DACs come in tiny SC70 packages. Each DAC

contains an on-chip precision output amplifier that allows rail-

to-rail output swing to be achieved.

1. Available in a 6-lead SC70 package.

2. Maximum 100 μA power consumption, single-supply

operation. These parts operate from a single 2.7 V to 5.5 V

supply, typically consuming 0.2 mW at 3 V and 0.4 mW at

5 V, making them ideal for battery-powered applications.

3. The on-chip output buffer amplifier allows the output of

the DAC to swing rail-to-rail with a typical slew rate of

0.5 V/μs.

The AD5602/AD5612/AD5622 use a 2-wire I²C-compatible

serial interface that operates in standard (100 kHz), fast

(400 kHz), and high speed (3.4 MHz) modes.

4. Reference derived from the power supply.

5. Standard, fast, and high speed mode I²C interface.

6. Designed for very low power consumption.

The references for AD5602/AD5612/AD5622 are derived from

the power supply inputs to give the widest dynamic output range.

Each part incorporates a power-on reset circuit that ensures the

DAC output powers up to 0 V and remains there until a valid

write takes place to the device. The parts contain a power-down

feature that reduces the current consumption of the devices to

<150 nA at 3 V and provides software-selectable output loads

while in power-down mode. The parts are put into power-down

mode over the serial interface. The low power consumption of

the AD5602/AD5612/AD5622 in normal operation makes them

ideally suited for use in portable battery-operated equipment. The

typical power consumption is 0.4 mW at 5 V.

7. Power-down capability. When powered down, the DAC

typically consumes <150 nA at 3 V.

8. Power-on reset and brownout detection.

Rev. B

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registeredtrademarks arethe property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

Fax: 781.461.3113

www.analog.com

12 3 4 5 6 7...24

下载PDF

与AD5622BKSZ-2500RL7相关器件

型号	品牌	描述	获取价格	数据表
AD5622BKSZ-2REEL7	ADI	2.7 V to 5.5 V, <100 uA, 8-/10-/12-Bit nanoDACs with	获取价格
AD5622WKSZ-1	ADI	IC SERIAL INPUT LOADING, 6 us SETTLING TIME, 12-BIT DAC, PDSO6, LEAD FREE, PLASTIC, MO-203	获取价格
AD5622WKSZ-1500RL7	ADI	2.7 V to 5.5 V, <100 uA, 8-/10-/12-Bit nanoDACs with	获取价格
AD5622WKSZ-1REEL7	ADI	2.7 V to 5.5 V, <100 uA, 8-/10-/12-Bit nanoDACs with	获取价格
AD5622YKSZ-1	ADI	IC SERIAL INPUT LOADING, 6 us SETTLING TIME, 12-BIT DAC, PDSO6, LEAD FREE, PLASTIC, MO-203	获取价格
AD5622YKSZ-1500RL7	ADI	2.7 V to 5.5 V, <100 uA, 8-/10-/12-Bit nanoDACs with	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

AD5622BKSZ-2500RL7

AD5622BKSZ-2500RL7 技术参数

AD5622BKSZ-2500RL7 数据手册

与AD5622BKSZ-2500RL7相关器件

与AD5622BKSZ-2500RL7相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

AD5622BKSZ-2500RL7

AD5622BKSZ-2500RL7 技术参数

AD5622BKSZ-2500RL7 数据手册

与AD5622BKSZ-2500RL7相关器件

与AD5622BKSZ-2500RL7相关文章

您还可以找

您在本页遇到什么问题？