MODEL: AD3V
Plug-in Signal Conditioners M-UNIT
[2] OUTPUT LEVEL
A: Open collector (NPN)
B: Open collector (PNP)
C: CMOS level
A/D CONVERTER
(16-bit resolution)
Functions & Features
• Converts a DC input into parallel digital signals with parity
check
[3] POWER INPUT
AC Power
• BCD, binary, reflected binary, two’s complement outputs
selectable
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
• Open collector or CMOS for output levels
• Output can be scaled and displayed in convenient
engineering unit
DC Power
R3: 12 – 24 V DC
(Operational voltage range 10.8 - 26.4 V, ripple 10 %p-p max.)
P: 110 V DC
• Loop test output
• Response time adjustable within 0.15 and 60 sec.
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
Typical Applications
[4] OPTIONS
blank: none
• Interface of analog signal to computers and PLC
• Input to a digital panel meter
/Q: With options (specify the specification)
50
(1.97)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
80
(3.15)
/C02: Polyurethane coating
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
139
(5.47)
mm (inch)
RELATED PRODUCTS
• Connector terminal block (model: CNT)
MODEL: AD3V–[1][2]–[3][4]
• Special cable (model: MCN26)
ORDERING INFORMATION
• Code number: AD3V-[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. AD3V-S1C-M2/Q)
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection
Input & power: M3.5 screw terminals
Output: 26-pin connector (OMRON XG4A-2634)
Paired connector: OMRON XG4M-2630-T, XG5M-263x-N
Cover: OMRON XG5S-2612
• Specify the specification for option code /Q
(e.g. /C01/S01)
• Use Ordering Information Sheet (No. ESU-1389) for
settings.
Screw terminal: Chromated steel (standard) or stainless
steel
Default setting will be used if not otherwise specified.
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Zero adjustment: -99.99 – 99.99 % (front)
Span adjustment-99.99 – 99.99 % (front)
Setting: (Front key pad)
[1] INPUT
Current
Z1: Range 0 – 50 mA DC (Input resistance 100 Ω)
Voltage
S1: Range -1 – + 1 V DC (Input resistance 100 kΩ min.)
S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)
S3: Range -30 – +30 V DC (Input resistance 1 MΩ min.)
• Scaled range
• Moving average
• Output code
• Available number of bits
• POL/OVF output logic
AD3V SPECIFICATIONS
ES-1389 Rev.24 Page 1/9
https://www.m-system.co.jp/