6812
DABiC-IV, 20-BIT SERIAL-INPUT,
LATCHED SOURCE DRIVER
The A6812– devices combine a 20-bit CMOS shift register,
accompanying data latches and control circuitry with bipolar sourcing
outputs and pnp active pull downs. Designed primarily to drive
vacuum-fluorescent displays, the 60 V and -40 mA output ratings also
allow these devices to be used in many other peripheral power driver
applications. The A6812– features an increased data input rate (com-
pared with the older UCN/UCQ5812-F) and a controlled output slew
rate.
A6812xA (DIP)
LOGIC
SUPPLY
LOAD
SUPPLY
28
27
1
2
3
V
V
DD
BB
SERIAL
DATA IN
SERIAL
DATA OUT
26 OUT
25 OUT
24 OUT
23 OUT
OUT
20
1
2
3
4
5
4
OUT
19
The CMOS shift register and latches allow direct interfacing with
microprocessor-based systems. With a 3.3 V or 5 V logic supply, they
will operate to at least 10 MHz.
5
6
OUT
18
OUT
17
OUT
16
22
21
20
19
18
OUT
OUT
OUT
OUT
OUT
7
8
A CMOS serial data output permits cascade connections in applica-
tions requiring additional drive lines. Similar devices are available as
the A6809– and A6810– (10 bits), A6811– (12 bits), and A6818– (32
bits).
OUT
15
6
7
8
9
OUT
14
9
10
11
12
13
14
OUT
13
The A6812– output source drivers are npn Darlingtons, capable of
sourcing up to 40 mA. The controlled output slew rate reduces electro-
magnetic noise, which is an important consideration in systems that
include telecommunications and/or microprocessors and to meet
government emissions regulations. For inter-digit blanking, all output
drivers can be disabled and all sink drivers turned on with a BLANK-
ING input high. The pnp active pull-downs will sink at least 2.5 mA.
OUT
12
17 OUT
OUT
11
10
2186
BLANKING
GROUND
BLNK
STROBE
ST
27
15 CLOCK
CLK
Dwg. PP-029-7
Three temperature ranges are available for optimum performance
in commercial (suffix S-), industrial (suffix E-), or automotive (suffix
K-) applications. Package styles are provided for through-hole DIP
(suffix -A), surface-mount SOIC (suffix -LW), or minimum-area
surface-mount PLCC (suffix -EP). Copper lead frames, low logic-
power dissipation, and low output-saturation voltages allow these
drivers to source 25 mA from all outputs continuously to more than
+43°C (suffix -LW), +61°C (suffix -EP), or +77°C (suffix -A).
ABSOLUTE MAXIMUM RATINGS
at TA = 25°C
Logic Supply Voltage, VDD ................... 7.0 V
Driver Supply Voltage, VBB ................... 60 V
Continuous Output Current Range,
I
OUT ......................... -40 mA to +15 mA
Input Voltage Range,
VIN ....................... -0.3 V to VDD + 0.3 V
Package Power Dissipation,
PD ........................................ See Graph
Operating Temperature Range, TA
(Suffix ‘E–’) .................. -40°C to +85°C
(Suffix ‘K–’) ................ -40°C to +125°C
(Suffix ‘S–’) .................. -20°C to +85°C
Storage Temperature Range,
FEATURES
■ Controlled Output Slew Rate
■ High-Speed Data Storage
■ 60 V Minimum
Output Breakdown
■ High Data Input Rate
■ PNP Active Pull-Downs
■ Low Output-Saturation Voltages
■ Low-Power CMOS Logic
and Latches
■ Improved Replacements
for TL5812–, UCN5812–,
and UCQ5812–
TS ............................... -55°C to +125°C
Caution: These CMOS devices have input static
protection (Class 2) but are still susceptible to
damage if exposed to extremely high static
electrical charges.
Complete part number includes a suffix to identify operating
temperature range (E-, K-, or S-) and package type (-A, -EP, or -LW).
Always order by complete part number, e.g., A6812SLW .