A6305
LOW DROPOUT VOLTAGE REGULATOR
300mA DUAL OUTPUT CMOS HIGH PSRR
AiT Semiconductor Inc.
www.ait-ic.com
DESCRIPTION
FEATURES
The A6305 is a dual, low-noise, low-dropout
regulator delivering at least 300mA of continuous
output current. The output voltage for each regulator
is set independently by trimming.
Two Low Dropout Voltage Regulators
300mA Output Current for Each LDO
20uA Operating Supply Current Per LDO
Low 47μVRMS Output Noise
Voltages are selectable in 100mV steps within a
range of 1.5V to 4.5V. Typical output noise is
47μVRMS, and PSRR is 73dB at 100Hz.
Standby Mode:0.1μA
Low 160mV Dropout at 300mA load
73dB PSRR at 100Hz
The
A6305
includes
two
independent
Excellent Line regulation: 0.05%/V
Independent Shutdown Controls
1.5V to 4.5V Factory-Preset Output
Output Current Limit
logic-controlled shutdown inputs and allows the
output of each regulator to be turned of
independently.
The A6305 includes high accuracy voltage
reference, error amplifier, current limit circuit and
output driver module.
High Accuracy: ±2% (±1% customized)
Available in SOT-26 Package
The A6305 has excellent load and line transient
response and good temperature characteristics,
which can assure the stability of chip and power
system. And it uses trimming technique to
guarantee output voltage accuracy within ±2%.
APPLICATION
Cellular phones
Cordless phones and radio communication
equipment
The A6305 is available in SOT-26 package.
Battery Powered equipment
Notebook and hand-hold equipment
Wireless LAN
ORDERING INFORMATION
GPS receivers
Package Type
SOT-26
Part Number
A6305E6R-XZ
A6305E6VR-XZ
TYPICAL APPLICATION
E6
X: Output Portfolio
See output voltage portfolio
Z: Pin Type
Note
V: Halogen free Package
R: Tape & Reel
SPQ: 3,000pcs/Reel
AiT provides all RoHS free products
Suffix “V” means Halogen free package
Note: Input capacitor(CIN = 1uF) and Output capacitor
(COUT= 1uF / 3.3uF) are recommended in all application circuit.
REV1.4
- SEP 2008 RELEASED, NOV 2016UPDATED -
- 1 -