5000W Transient Voltage Suppressor
A5KP-G Series
Breakdown Voltage: 6.8 to 440 Volts
Peak Pulse Power: 5000 Watts
RoHS Device
R-6
Features
- Glass passivated chip.
0.052(1.32)
0.048(1.22)
DIA.
- 5000W peak pulse power capability with a 10/1000µs
waveform, repetitive rate (duty cycle):0.01%
- Low leakage.
1.0(25.4)
MIN.
- Uni and Bidirectional unit.
- Excellent clamping capability.
- Very fast response time.
- Comply with AEC-Q101
0.360(9.14)
0.340(8.64)
R
- UL recognized file # E349157
0.360(9.14)
0.340(8.64)
- Range: A5KP5.0(C)A thru. A5KP190(C)A
DIA.
Mechanical Data
1.0(25.4)
MIN.
-Case: Molded plastic.
-Epoxy: UL 94V-0 rate flame retardant
-Lead: Solderable per MIL-STD-202,
method 208 guranteed.
Dimensions in inches and (millimeter)
-Polarity: Color band denotes cathode
end except Bipolar.
-Mounting position: Any
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive loaded.
For capacitive load, derated current by 20%.
Symbol
Parameter
Value
Unit
Peak power dissipation with a 10/1000μs
waveform (Note 1)
PPP
W
5000
Peak pulse current with a 10/1000μs waveform
IPP
PD
A
W
A
See Next Table
(Note 1)
Power dissipation on infinite heatsink at TL=75°C
8.0
Peak forward surge current, 8.3ms single
half sine-wave unidirectional only (Note 2)
IFSM
500
Maximum instantaneous forward voltage at
100A for uni-directional devices only (Note 3)
3.5 / 5.0
VF
V
Operating junction and storage temperature
range
TJ, TSTG
-55 to +150
°C
NTOES:
(1) Non-repetitive current pulse, per fig.5 and derated above TA=25°C per fig.1
(2) Measured on 8.3 ms single half sine wave of equivalent square wave, duty cycle=4 pulses per minute maximum.
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V
Company reserves the right to improve product design , functions and reliability without notice.
REV:B
Page 1
AQW-BTV06
Comchip Technology CO., LTD.